Bids Are Invited For Interlocking Hexagonal Block Paving On Rua Das Acácias, Rua Laurita Ferraz Pereira, Rua José Pereira Da Silva And Avenida Marginal, In The Municipality Of Ponto Dos Volantes, According To Work Plan No. 02676/2026, Special Transfer No. 1301001260/2026.

Supply And Placement Of Construction Sign Made Of Galvanized Sheet 26 Esp. 0.45Mm, Dimension (3X1.5)M - Plotted With Vinyl Adhesive, Affixed With 4.8X40mm Rivets, On 20X20mm Metal Structure, Special. 1, 25Mm, Including Autoclaved Eucalyptus Support Painted With Pva Paint Two (2) Coats, Regularization Of The Sub-Bed - (Normal Proctor), Execution Of Machined Concrete Gutter, Molded In Place In A Straight Section, 30 Cm Base X 10 Cm Height. - Af_01/2024, Curb Guide, In Concrete With Fck 20Mpa, Pre-Molded, Mfc-01 Der-Mg Standard, Dimensions (12X16, 7X35)Cm - Exclusive Gutter, Including Excavation, Piling And Transport With Removal Of Excavated Material (In Bucket)., Execution Of Pavement With Interlocked Floor, Type Hexagonal, Esp. 8Cm, With Fck Of 35Mpa, - Including Sand Mattress, Esp. 6Cm, For Laying, Mechanized Compaction, Mechanical Loading And Unloading In Truck, Exclusive Interlocked Floor Transport., Lean Concrete Ballast, - Lean Concrete Ballast, Including Transport, Launching And Compacting, Formwork And Deformation For Concrete Curtain Or Structural Wall - Formwork And Deformation For Concrete Curtain Or Wall Structural (Beam-Wall), Maximum Height Of 360Cm, With Plasticized Plywood Sheet, Esp. 18Mm, Reuse (3X), Including Locking With Wire Ties And Wooden Plumb Prop, Reinforced Concrete Tube, Class Pa1, Diameter Of 800Mm - Reinforced Concrete Tube, Diameter Of 800Mm, Including Mechanical Loading And Unloading In Truck, Laying And Grouting, Exclusive Excavation And Transport, Supply Of Structural Concrete, Machined Pumped - Supply Of Structural Concrete, Machined Pumpedsupply Of Structural Concrete, Machined Pumped, With Fck 25Mpa, Including Casting, Densification And Finishing (Foundation, Cutting, Bending And Assembly Of Ca-50 Steel, Diameter 12.5Mm, - Cutting, Including Spacer, Bending And Assembly Of Ca-60 Steel, Diameter (4.2Mm To 5.0Mm - Cut, 0Mm Including Spacer