Bids Are Invited For Acquisition Of Office And Office Supplies To Meet The Demand Of The Cpr/So And Supported Units During The 2026 Financial Year

36.10.16.00001535-0Plasticizer, Compact, Plasticizing With Polaseal From 005 To 010 (125 To 250 Microns) On Papers Up To 350 G/M² Or 0.40 Mm Maximum Thickness, Functional With Synthetic Paper, Model, Domestic, Total Net Capacity One Sheet Per Time, Speed 280Mm/Min, Voltage 127V, 1 Year Warranty.36.10.16.00001535-0, 37.50.00.00052368-2Pruning Scissors, For Grass And Hedges, 12 Inch Sae 1060 Steel Blade And 21 Inch Wooden Handle Cm, With A Variation Of +/- 1 Cmpackaging With Product Identification Data And Manufacturers Brand. Roll With At Least 200 G. The Following Information Must Be Printed Or Pasted By The Manufacturer, Directly On The Product Or Packaging In Which It Is Packaged: Name/Cnpj Of The Manufacturer, Brand Of The Product, Address, Quantity, Composition, Date Of Manufacture Or Batch, As Well As On The Risks Posed To The Health And Safety Of Consumers, Current Regulations And Records With Bodies Competent. Contain The Conformity Identification Seal That Must Be Affixed To The Packaging. Comply With Conama/Ibama Resolution (S) And Ordinance (S) Conmetro, Inmetro Vigente (S).40.20.00.00167888-4, 51.10.00.00194367-7Multipurpose Model Scissors, In Stainless Steel, 8 (Eight) Inches Or 20 (Twenty) Cm In Length, Tolerance -2%, , Handle In High-Resistance Plastic. Labeling: Must Present, At A Minimum, The Following Technical Information In A Legible And Indelible Form And In Portuguese: Name/Cnpj Of The Manufacturer/Importer; Address Of The Manufacturer/Importer, Brand. The Product Must Contain The Inmetro Conformity Identification Seal, Which Must Be Affixed To The Packaging, In A Clear, Visible And Indelible Way. Length And In Number Of Units, With Equal Nominal Content.51.10.00.00194367-7, 51.20.00.00145848-5Stapler, Pistol Type (Rocama), Compatible With The Use Of Staples 106/4, 106/6 And 106/8 Mm. Minimum Load Capacity 01 (One) Comb Of 100 Staples. The Following Information Must Be Printed By The Manufacturer, Directly On The Packaging In Which The Product Is Packaged: Name/Cnpj Of The Manufacturer, Warranty, As Well As On The Risks That Pose Consumer Safety.51.20.00.00145848-5, 59.15.00.00186884-5Filter, Line, Bivolt, Minimum Of 04 And Maximum Of 06 Sockets, 2P+T Socket, On/Off Button, With Luminous Indication, 10 A. Packaging: Must Contain In A Clear, Indelible And Permanent Form, The Corporate Name, Cnpj/Cpf Of The Supplier, Cartoner Or Assembler. The Information On The Body Of The Product Must Appear On The Packaging If It Is Not Transparent. Labeling: The Body Of The Product Must Contain The Information: Name, Brand Or Logo Of The Manufacturer/Importer; The Voltage They Are Intended For In Volts (V); The Power In Volt Ampere (Va) Or In Watt (W), Or Current Of The Set In Ampere (A). Comply With Inmetros Current Ordinance(S). 14136) 10 A, Emi/Rfi Filtering, Dps (Surge Counter Protection Device) (Fn+Ft+Nt), Class Iii (Iec 61643-11). Designation Lr6.Packaging: Containing 02 Units.Labeling: O