Request For Quotation Purchase Of Spare Parts For The Model 80 Armored Personnel Carrier According To The Customers Technical Specifications.

Transistor Switch With Coil, Article No. 9301.3734 Transistor Switching Block Rated Voltage – 24W System Type – Contactless – Transistor Operating Current Switched Current In The Primary Circuit Of The Coil Up To 5-7A Secondary Voltage Not Less Than 20-25Kw The Switch Housing Must Be Made Of Cast Aluminum With Advanced Fins For Effective Heat Dissipation The Electronic Board Must Have A Varnish Coating Coil Oil-Filled Or Dry Sealed Design The High-Voltage Terminal Must Be Protected Against Current Leakage At High Humidity Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Article No. 2517.3813 The Device Is Designed For Continuous Measurement Of Engine Rotation Frequency And Display Of Engine Operating Time Rated Voltage – 24 V Upper Measurement Limit – 3000-4000 Rpm Graduation Value – 100 Rpm Signal Type – Pulse Vibration Resistance - The Device Must Maintain Accuracy Of Readings During Vibrations With A Frequency Of Up To 50 Hz And Acceleration Of Up To 50 M/S2 Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Oil Filter Filter Element. Article No. 740-1012040 Type Size – Height 200-205Mm Outer Diameter -100-103Mm Construction Type - Replaceable Paper Element With The Rest Of The Internal Frame And Metal Covers Filtration Material – Highly Porous Filter Paper With Final Impregnation Nominal Filtration Fineness 25-40 Μm Completeness: Each Element Must Be Supplied With A Set Of Sealing Gaskets (Body Rings And Small Ring) Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Rear Light, Article No. Fp133 Multifunctional Rear Light Rated Voltage – 24W Lamp Type – A24,21,3 Case Material: Impact-Resistant Metal Or Reinforced Polymer With Protective Grille Glow Color - Red Blackout – The Design Must Provide The Ability To Install Standard Blackout Attachments Vibration And Impact Resistance The Flashlight Must Withstand Shock Loads Of Up To 10-15G (According To Gost For Military Equipment) Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Article No. G290v-3701000-01 Generator Type – Synchronous, Three-Phase, Alternating Current, With Built-In Semiconductor Rectifier Unit. The Housing Design Is Waterproof And Sealed. Cooling - Continuous Ventilation. Rated Output Voltage – 28V Maximum Rectified Current – 150A Rated Power – 4.2 Kw Direction Of Shaft Rotation – Right On The Shaft Side Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Article No. A28-40 Two-Contact, With Flange Base P45t-41 Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Article No. Sp-24G-3802000-U-T A Mechanical Device With A Dial Indicator And A Counter Trip Meter. Drive Type: Mechanical, Carried Out Through A Flexible Shaft (Cable) From The Transfer Case. Speed Scale: Marked Up To 120 Km/H Functions: Indication Of Current Driving Speed Accounting For The Total Mileage Of The Car (Odometer) The Device Is Installed On The Drivers Instrument Panel The Device Is Designed For Operation In A Wide Range Of Temperatures And High Humidity. Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Front Lamp, Article No. Pf-135 Rated Voltage -28 V Base: P42s/11 Power:40W Flask Type: Pear-Shaped Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Speedometer Cable 3 M, Article No. Gv300 Length - 3000Mm Design – Steel, Stranded Core (Cable) With A Flexible Protective Sheath Sheath Material – Galvanized Steel Strip With An Outer Coating Of Pvc Or Wear-Resistant Rubber Tip Type M18x1.5 Core Diameter 4-5 Mm Frost Resistance The Lubricant Inside The Cable Should Retain Its Properties At Temperatures Down To -50C Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Driven Clutch Disc Kamaz 7403. Article No. 142.1601130 Disk Type – Driven, With Spring-Rubber Damper Outer Diameter Of The Lining – 350 Mm Internal Diameter Of The Lining – 200 Mm Spline Hole Parameters – 10 Splines, Diameter 38X44 Mm Disc Thickness On Linings – 10.0-10.6 Mm Transmitted Torque - Up To 800 N*M The Material Of The Friction Linings Is A Non-Asbestos Composition With A High Coefficient Of Friction. Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Repair Kit For Fine Fuel Filter. Article No. 740.1117010-Rk Repair Kit Contents: Filter Cover Gasket (Rubber/Silicone) – 2 Pcs. Rod Sealing Rings – 2 Pcs. Filter Element Sealing Ring – 2 Pcs. Drain Plug Gasket (Copper Or Paronite) – 2 Pcs. Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00