Request For Quotation Purchasing Construction Goods

Non-Woven Needle-Punched Material. Characteristics. Material Type: Non-Woven Needle-Punched Geotextile; Surface Density: No Less Than 200 G/M² (Weight Tolerance ≤ 8-10%); Thickness Of The Canvas: At Least 1.4 – 2.5 Mm (Measured Under A Load Of 2 Kpa); Breaking Load (Strength): No Less Than 5.0 – 7.0 Kn/M; Elongation At Break: Within 50 – 140% (Provides High Elasticity And Resistance To Tearing); Punching Strength: Not Less Than 600 – 800 N; Filtration Coefficient: ~50 ± 15% M/Day (At A Pressure Of 2.0 Kpa); Pore ​​Size (Filtration Capacity): No More Than 130 Microns (Effectively Retains Soil Particles); Roll Size: No Less Than 2 × 50 M; Total Area Of ​​The Canvas Per Roll: Not Less Than 100 M²; Material (Composition): 100% Polyester Or Polypropylene; Color: Mix (A Mixture Of Polyester Fibers Of Various Shades), Steel Square Profile Pipe. Characteristics. Purpose: For The Manufacture Of Metal Structures, Frames, Fences, Supporting Elements And Other Construction And Production Needs; Section Shape: Square. External Dimensions Of The Profile: Section Size: Not Less Than 20 X 20 Mm; Wall Thickness: Not Less Than 1.5 Mm; Standard Whip Length: At Least 6 Meters; Cross-Sectional Area: About 1.12 Cm². Material: General Purpose Carbon Structural Steel. Steel Grades: St2ps5, St3sp, St08-3Ps/Sp; Type Of Production: Electric Welded (Straight Seam) Cold-Deformed., Decorative Bamboo Wall Panel. Characteristics: Sheet Size: Width, Not Less Than 1220 Mm, Height: Not Less Than 3000 Mm (Ideal For Seamless Installation From Floor To Ceiling); Thickness: At Least 5 Mm (Thin But Durable Profile); Material Density: No Less Than 750 Kg/M³, Which Ensures Rigidity And Resistance To Dents; Sheet Area: Not Less Than 3.66 M²; Base Material: Bamboo Fiber / Nanobamboo With Polymer Binder; Surface: Natural Wood Decor; Installation: On Glue, Profile Systems Or Butt-To-Butt; It Is Used For Interior Decoration Of Walls, Ceilings, And Decorative Structures., Universal Docking Strip. Characteristics. Product Type: Docking Strip; Purpose: Design And Protection Of Joints Of Facade Panels, Siding And Other Facing Materials; Decorative Closing Of Installation Gaps; Protection Of Joints From Moisture And Contamination. Width (Visible Part): Not Less Than 50 Mm; Height (Bend Depth): Not Less Than 18 Mm; Length: Not Less Than 3000 Mm; Metal Thickness: Most Often Not Less Than 0.5 Mm; Material: Galvanized Steel With A Protective And Decorative Polymer Coating (Polyester)., Professional Synthetic Grass Surface. Characteristics. Pile Height: Not Less Than 50 ± 2 Mm; Total Coating Height: At Least 52–54 Mm; Thread Shape: S-Shaped / Diamond / C-Shape / Wave; Linear Thread Density: At Least 10,000–16,000 Dtex (The Higher This Figure, The Stronger And Thicker The Blades Of Grass); Thread Thickness: At Least 300–400 Microns; Thread Width: At Least 1.2–1.8 Mm; Number Of Filaments: At Least 6–12 Per Bundle; Resistant To Uv Radiation. Fiber Type: Monofilament (The Most Durable, Perfectly Restores Shape After Stress); Tufting Pitch: At Least 3/8 Inch; Distance Between Rows: Not Less Than 9.5 Mm; Number Of Stitches: At Least 16–22 Per 10 Cm; Stitch Density: At Least 16,800–23,100 Stitches/M²; Number Of Bundles: At Least 8,400–11,550 Bundles/M². Primary Base: Polypropylene Fabric; Secondary Backing: Non-Woven Polypropylene (Remains Soft Even In Low Temperatures And Does Not Burn The Skin If Dropped); Fastening Type: Latex Or Polyurethane; Water Permeability ≥ 60 L/Min/M²; There Are Drainage Holes; Hole Size: At Least 4–6 Mm; Roll Width: Supplied In Rolls Of At Least 4 Meters Wide With A Winding Length Of At Least 30–40 Meters., Paint Roller. Characteristics. Type: Mini Paint Roller With Extended Handle; Handle Length: Extended, Total Base Length About 400 Mm; Roller Width: Not Less Than 100 Mm; Clasp Diameter: Not Less Than 5.7 Mm; Pile Height: Not Less Than 11 Mm; Fur Coat Material: Polyacrylic / Polyester; Handle Material: Plastic; Design: Frame Roller With Handle; Universal; Type Of Surfaces: Walls, Ceilings, Rough And Medium-Smooth Bases; Materials Used: Water-Based, Latex, Acrylic And Other Paints And Varnishes; Included: Roller Assembly; Plastic Handle With Metal Clasp., Decorative Wall Slatted Panel. Characteristics: Material: Spruce With A Textured Bamboo-Like Coating, Ensuring Environmental Friendliness And Rigidity Of The Structure; Panel Size: Height: Not Less Than 2900 Mm; Width: No Less Than 160 Mm; Thickness (Relief Depth): Not Less Than 15 Mm; Useful Panel Area: Not Less Than 0.464 M²; Volume Of One Panel: Not Less Than 0.00696 M³; Design And Color: Rectangular Profile Of Lamellas (Lovers) In Beige-Dark Or Natural Wood Tones. Purpose: Interior Wall Decoration, Decorative Inserts, Accent Areas; Installation: Glue, Self-Tapping Screws On The Sheathing Or Seamless Installation., Equal L-Shaped Corner. Characteristics: Shelf Size: No Less Than 10 × 10 Mm; Length: Not Less Than 3050 Mm; Material: Aluminum With Anodized Coating For Protection Against Corrosion And Scratches); Surface: Glossy Gold (Mirror Gold Shine); Mounting Type: Glue Or Hidden Mounting Without Holes; Purpose: Protection And Decorative Finishing Of External Corners Of Walls, Panels, Furniture; Moisture-Resistant, Uv-Resistant; Operating Temperature: -40°C To +80°C (Typical For Anodized Aluminum)., Steel Square Profile Pipe. Purpose: For The Manufacture Of Metal Structures, Frames, Fences, Supporting Elements And Other Construction And Production Needs; Section Shape: Square. External Dimensions Of The Profile: Section Size: Not Less Than 15X15 Mm; Wall Thickness: Not Less Than 1.5 Mm; Standard Whip Length: At Least 6 Meters; Cross-Sectional Area: About 0.81 Cm². Material: General Purpose Carbon Steel. Steel Grades: St2ps5, St3sp, St08-3Ps/Sp; Type Of Production: Electric Welded (Straight Seam) Cold-Deformed., Finishing Polymer Putty (Dry Mixture). Characteristics. Color: White (Increased Whiteness); Binder: Polymer; Maximum Filler Size: No More Than 0.16 Mm; Water Consumption: About 9–10 Liters Per At Least 25 Kg Of Dry Mixture; Layer Thickness: No Less Than 0.5–2 Mm (Recommended), Allowed Up To No More Than 3 Mm; Material Consumption ≈ 1.2 Kg/M² With A Thickness Of At Least 1 Mm; Application Temperature: +5 °C To +30 °C; Drying Time: About 24 Hours At +20 °C; Adhesion Strength (Adhesion): Not Less Than 0.5 Mpa; Mobility Brand: Pk2; Specific Effective Activity Of Radionuclides: No More Than 370 Bq/Kg., Alkyd Enamel Pf-115. Characteristics. Color: White; Gloss Level: Glossy/Semi-Gloss; Base: Alkyd Varnish, Pigments, Fillers, Solvent And Functional Additives. Suitable For Interior And Exterior Work; Material Of The Surface To Be Painted: Metal, Wood, Concrete, Fiberboard, Chipboard (Windows, Doors, Fences, Metal Structures). Consumption: At Least 100–180 G/M² Per Layer. In One Jar: At Least 20 Kg., Portland Cement With Mineral Additives; Strength Class: Cem Ii/A-Sh 42.5N (Cem Ii: Portland Cement With Mineral Additives; /A-Sh: Granulated Blast Furnace Slag Is Used As An Additive In An Amount From 6% To 20% (Category A); Strength Class That Guarantees Withstanding A Compressive Load Of At Least 42.5 Mpa. N: Normally Hardening Cement That Gains Design Strength In A Standard Time (At Least 28 Days). Ss: Sulfate-Resistant Portland Cement). Strength Grade: Not Lower Than M500 (Capable Of Withstanding Loads Of Up To 500 Kg Per \(1\) Sq. Cm Of Finished Concrete); Color: Grey. One Pack Must Contain At Least 50 Kg., Alkyd Enamel Pf-115. Characteristics. Color: Green; Gloss Level: Semi-Matte; Base: Alkyd Varnish, Pigments, Fillers, Solvent And Functional Additives. Suitable For Interior And Exterior Work; Material Of The Surface To Be Painted: Metal, Wood, Concrete, Fiberboard, Chipboard (Windows, Doors, Fences, Metal Structures). Thinner: White Spirit; Consumption: At Least 100–300 G/M² Per Layer. Drying Time For Each Layer At A Temperature Of (20±2) °C: No More Than 24 Hours. In One Jar: At Least 20 Kg., Alkyd Enamel Pf-115. Characteristics. Type Of Material: Pentaphthalic Enamel Pf-115; Color: Gray; Gloss Level: Glossy; Base: Alkyd Varnish, Pigments, Fillers, Solvent And Functional Additives. Suitable For Interior And Exterior Work; Material Of The Surface To Be Painted: Metal, Wood, Concrete, Fiberboard, Chipboard (Windows, Doors, Fences, Metal Structures). Thinner: White Spirit, Solvent Or A Mixture Thereof; Consumption: At Least 110–130 G/M² Per Layer. Drying Time For Each Layer At A Temperature Of (20±2) °C: No More Than 24 Hours. In One Jar: At Least 20 Kg., Quartz Sand (Or River Sand). Characteristics. Fractional Composition: Not Less Than 0.06–1.2 Mm; Origin: Natural Quartz Or River Sand; Grain Shape: Acute, Crushed Or Partially Rounded; Color: Light Yellow, White Or Grey; The Content Of Clay And Dust Particles Is Not More Than 1.0%; Free Of Clay Impurities In Lumps And Organic Impurities; Humidity Upon Delivery: No More Than 5%; Bulk Density: Not Less Than 1300–1500 Kg/M³; True Grain Density: No Less Than 2600–2650 Kg/M³; Mohs Hardness 7 (High Abrasion Resistance); Filtration Coefficient: Not Less Than 5 M/Day., Glue Liquid Nails. Characteristics. Type Of Glue: Mounting Acrylic; Base: Water; Color: Transparent / Colorless After Drying; Smell: Practically Absent; Purpose: Bamboo Panels, Louvers, Flexible Marble, Skirting Boards, Decorative Panels; Adhesion Strength: Not Less Than 12 Mpa; Operating Temperature: From -40 °C To +120 °C; Application Temperature: Up To +40 °C; Storage Conditions: At Temperatures Up To +35 °C; Release Form: Cartridge No Less Than 330 Ml; Application Method: Mounting Gun; Adjustment Time: No More Than 10–20 Minutes; Complete Drying: No More Than 24–48 Hours. Advantages, High Adhesion: Fixes Elements Equally Firmly On Concrete, Wood, Plaster, Plastic And Metal., Galvanized Mesh. Characteristics. Product Type: Galvanized Steel Woven Mesh (Chain-Link); Purpose: Fencing Areas, Construction Work, Enclosures, Economic And Industrial Facilities; Cell Size: At Least 50 × 50 Mm (Optimal Balance Between Strength And Flexibility); Wire Diameter: Not Less Than 2.0 Mm; Wire Material: Low Carbon Steel Wire; Coating: Zinc (Galvanized, Protects Against Rust And Extends Service Life); Type Of Manufacture: Wicker (Chain-Link Mesh); Cell Shape: Rhombic; Roll Height: At Least 2.0 M (Reliable And Load-Resistant Design); Roll Length: At Least 10 M (Standard Format For Construction And Household Needs). Blade Width: At Least 2000 Mm (Convenient For Large Projects And Quick Installation)., Two-Component Polyurethane Adhesive For Lawn And Artificial Grass. Characteristics. Composition: Component A: Polyurethane Resin; Component B: Isocyanate Hardener; Does Not Contain Water Or Organic Solvents. Blend Color: Beige/Light Brown; Component Ratio: Approximately 9:1 By Weight; Viability Of The Mixture At +20°C: No More Than 30–60 Minutes; Primary Setting: At Least 6–12 Hours; Complete Curing: At Least 24–48 Hours; Consumption For Artificial Grass: Approximately 0.8–1.2 Kg/M²; Working Temperature Of Application: From +10°C To +30°C; Operating Temperature From −40°C To +120°C; Density Of Component A: About 1.5–1.7 G/Cm³; Density Of Component B: About 1.1–1.2 G/Cm³. Properties: High Elasticity, No Shrinkage, Moisture Resistance, Resistance To Weathering And Temperature Changes. The Kit Contains Two Components: Component A: Basic Paste (Polyurethane Resin With Fillers); Part B: Liquid Hardener (Isocyanate) In A Separate Small Bottle., Laminated Chipboard. Characteristics. Color Range: Neutral Light Gray Shade That Easily Combines With Both Bright Colors And Wood Decors.; Surface Type, Texture: Shagreen / Pe (Fine Grain); Base: Chipboard, Emission Class E1-E0.5; Thickness: No Less Than 16 Mm / 18 Mm; Sheet Format, Length: No Less Than 2800; Width: Not Less Than 2070 Mm; Sheet Area: Not Less Than 5.03 M²; Density: Usually Varies From 650 To 750 Kg/M³; Lamination On Both Sides; Variety1., Birch, Coniferous Or Combined Plywood. Characteristics. Thickness: Not Less Than 6 Mm (Technological Tolerance ± 0.2 – 0.5 Mm Is Allowed, For Example, Not Less Than 6.5 Mm); Sheet Size: No Less Than 1220 × 2440 Mm; Sheet Area: Not Less Than 2.98 M²; Number Of Layers (Veneer): At Least 5 Layers; Density: At Least 550–700 Kg/M³ (Depending On The Type Of Wood); Humidity: At Least 5–12%; Thickness Deviation: ±0.4–0.6 Mm (Standard); Formaldehyde Emission Class: E1 (For Interior Use); Sanding: Nsh (Unpolished), Sh1 (One-Sided), Sh2 (Double-Sided); Glue Brand: Fk (Moisture Resistant For Interior Use) Or Fsf (Increased Moisture Resistance For Exterior Use); Bending Strength: No Less Than 30–60 Mpa.