Tenders Are Invited For Part No. 1: Thermal Modernization Of The Volunteer Fire Department Building In Bodziejowice. Part No. 2: Thermal Modernization Of The Building Of The Volunteer Fire Department In Witów. Part No. 3: Thermal Modernization Of The Volunteer Fire Department Building In Zawada Pilicka.

1. Part No. 1: Thermal Modernization Of The Volunteer Fire Department Building In Bodziejowice.2. The Subject Of The Order Is The Thermal Modernization Of The Volunteer Fire Department Building In Bodziejowice. Insulation Of External Walls. Insulation Of The External Walls Of The Building Was Designed By Using Polystyrene Foam Attached To The Façade, Attached To The Existing External Partitions. Roof Insulation. Insulation Of The Flat Roof Was Designed By Using Granulated Mineral Wool Introduced Into The Space Of The Unventilated Flat Roof. Gutters And Downpipes Due To The Planned Insulation Of The External Walls And Roof, It Is Planned To Disassembly Of Existing Gutters And Downspouts.Window Joinerythe Project Envisages Replacing The Existing Window And Door Joinery With New Ones With Parameters That Meet The Current Requirements Of The Regulations Regarding The Technical Conditions To Be Met By Buildings And Their Location.Finishing The Facade Of External Wallsafter Applying The Thermal Insulation Layer And The Reinforced Layer, The Project Envisages Finishing The External Walls In The Form Of Structural Silicone Plaster Of The Lamb Type. Renovation Of The Entrance To The Buildingthe Project Envisages The Renovation Of The Entrance To The Building, Including The Replacement Cladding, Equipment Elements And Roofing. Accompanying Works As Part Of The Implementation Of Thermal Modernization Works, The Project Envisages The Performance Of Minor Accompanying Works Necessary For The Proper Functioning Of The Building After The Completion Of The Works.3.2. Electrical Installationsthe Project Envisages Replacing The Existing Lighting Fixtures With New Ones, With Parameters Consistent With The Calculations Made. New Luminaires Should Be Connected To The Existing Electrical Installation, Without Changing Its Route, Using The Existing Power Supply Points. Sign Illumination Installation. The Sign Illumination Installation Should Be Powered From The Main Switchboard (Rg). The Switchgear Should Be Extended With A New Sign Supply Circuit, Protected By An Overcurrent Switch With B Characteristic, In = 16 A. The New Circuit Should Be Clearly Described And Marked In The Switchboard. Device Power Supply Installation Air Conditioning For The Purpose Of Supplying The Air Conditioning Installation, An Rk Switchgear Is Designed, Which Should Be Equipped With Residual Current, Overvoltage And Overcurrent Protection For Individual Loads. Power The Rk From Behind The Pwp Device, Using A Power Line With The Minimum Parameters Yky 5X6mm2.3.3. Photovoltaic Installationthe Photovoltaic Installation With A Capacity Of 8.1 Kw Will Be Installed On The Roof Of The Volunteer Fire Department Building In Bodziejowice Using A Dedicated, Prefabricated Supporting Structure Intended For The Roof In A Trapezoidal Sheet Metal Sheathing. Photovoltaic Modules With A Unit Power Of 450 W Will Be Used As A Source Of Renewable Energy. The Modules Should Be Connected Together In Chains Accordi