Tenders Are Invited For Poly Aluminum Chloride – Successful Supply Of Polyaluminum Chloride

Poly Aluminum Chloride – Successful Supply Of Polyaluminum Chloride. 2. The Subject Of The Order Includes: A.) Successive Delivery Of Coagulant: Polyaluminum Chloride In The Amount Of 800 Mg With The Following Technical Parameters: Form: Aqueous Solution With A Slightly Yellowish Tint Chemical Composition: Al2o3 [%] Minimum 9.5 Al3+ [%] Minimum 5.0 Chlorides (Cl-)[%] Minimum 11.5 Iron [%] Below 0.01 Sulphates [%] Approx. 1.2 Alkalinity [%] Minimum 65 Ph [%] Approx. 3.0 Density [Kg/M3] At 20Oc Approx. 1200 Viscosity [Mpa] At 20Oc Approx. 10 Aluminum Sulfate Hydroxychloride Content [%] Minimum 10 Properties: Quick Formation Of Flocs And Their Proper Sedimentation, Formation Of Small Amounts Of Post-Coagulation Deposits, Possibility Of Slight Acidification Of The Water Environment And Carrying Out The Process In A Wide Ph Range, Easy And Accurate Dosing, Compliance With The Pn-En 17034:2018-02 Type 1 Standard Or Equivalent. B.) Successive Delivery Of The Coagulant: Polyaluminum Chloride In The Amount Of 450 Mg With The Following Technical Parameters: Form: Grayish Solution Chemical Composition: Al2o3 [%] Approx. 19.8 Al3+ [%] Approx. 10.5 Chlorides (Cl-) [%] 0K 7.0 Alkalinity [%] Minimum 85 Ph [%] Approx. 4.0 Density [Kg/M3] At 20Oc Approx. 1280 Viscosity [Mpa] At 20Oc Approx. 20 Properties: Quick Formation Of Flocs And Their Proper Sedimentation, Formation Of Small Amounts Of Post-Coagulation Sediments, Possibility Of Slight Acidification Of The Water Environment And Carrying Out The Process In A Wide Ph Range, Easy And Accurate Dosing, Compliance With The Pn-En 17034:2018-02 Type 2 Standard Or Equivalent 3. Products Must Have A Current Certificate Of The National Institute Of Hygiene Confirming Their Approval For Contact With Drinking Water. 4. Frequency Of Deliveries Depends On The Current Demand Of The Ordering Party, On Average: Task A) - Approx. 66 Mg/Month, Task B) - Approx. 38 Mg/Month. 5. Delivery Time: Up To 5 Business Days From The Date Of Placing The Order By Telephone Or E-Mail By The Ordering Party. 6. After Accepting The Order, The Contractor Will Always Inform The Ordering Party About The Delivery Date. 7. Place Of Delivery: Water Treatment Plant, Ul. Zwięczycka 36, ​​35-083 Rzeszów. 8. The Contractor Attaches The So-Called Delivery Certificate Containing The Order Number, Loading Date, Vehicle Registration Number, Quality Assurance In Accordance With The Product Specification (Also Attached) And The Weight (Gross, Net, Tare) Of The Vehicle And The Name Of The Person Issuing The Certificate And A Current Bill Of Lading For A Given Delivery. 9. During The Term Of The Contract, The Contractor Is Obliged To Provide Professional Advice And Assistance In The Use Of The Product, And Conduct Laboratory And Technical Tests, If Necessary.