Request For Quotation Product Name: Network Cable Utp Cat 5E Ship D135-2. Type: Twisted Pair (Network Cable). Category: Cat 5E. Model: D135-2. Manufacturer: Ship. Length: 305 Meters (Bay)

Product Name: Network Cable Utp Cat 5E Ship D135-2. Type: Twisted Pair (Network Cable). Category: Cat 5E. Model: D135-2. Manufacturer: Ship. Length: 305 Meters (Bay). Construction: Utp (Unshielded). Number Of Pairs: 2 Pairs (4 Cores). Conductor Material: Copper (Cu), Solid. Core Diameter: 0.51 Mm (24 Awg). Shell: Pvc (Polyvinyl Chloride). Color: Grey. Purpose: Construction Of Local Area Networks (Lan), Video Surveillance Systems, Telephony And Data Transmission. Data Transfer Speed: Up To 100 Mbit/S. Transmission Frequency: Up To 100 Mhz. Operating Temperature: -20 °C To +60 °C. Laying Conditions: For Internal Laying. Packing: Cardboard Box / Coil 305 M. Features: Stable Signal Transmission; Resistance To Interference (Within The Utp Standard); Ease Of Installation; Corresponds To Category 5E. Quality Requirements: New Product, Without Damage, Factory Production, Compliance With Gost/St Rk., Product Name: Vacuum Pump Shimge Pw370. Pump Type: Surface Self-Priming Vortex. Motor Power: 370 W (0.37 Kw). Supply Voltage: 220–240 V, 50 Hz. Maximum Productivity: No Less Than 2.4 M³/H (40 L/Min). Maximum Head: Not Less Than 36 M. Maximum Suction Depth: Up To 8 M. Maximum Operating Pressure: Up To 5 Bar. Diameter Of Inlet And Outlet Pipes: 1 (25 Mm). Type Of Pumped Liquid: Clean Water Without Abrasive Impurities. Maximum Liquid Temperature: Up To +90 °C. Pump Body Material: Cast Iron. Impeller Material: Brass. Shaft Material: Aisi 304 Stainless Steel. Protection Class: Ipx4. Motor Protection: Built-In Thermal Protection Against Overheating. Installation: Horizontal. Purpose: Water Supply, Increasing Pressure In The System, Supplying Water From Wells And Reservoirs, Irrigation And Household Needs. Quality Requirements: The Product Is New, Not Used, Factory-Made, Without Mechanical Damage., Product Name: Cement M400. Type: Portland Cement. Strength Grade: M400. Strength Class: 32.5 (According To Standard En 197-1 / St Rk Or Gost). Color: Grey. Composition: Portland Cement Clinker, Gypsum, Mineral Additives (Depending On The Manufacturer). Beginning Of Setting: No Earlier Than 45–60 Minutes. End Of Setting: No Later Than 10–12 Hours. Compressive Strength: Corresponds To Class 32.5 / Grade M400. Packaging: 50 Kg Bags. Storage Conditions: In A Dry Place, Protected From Moisture. Shelf Life: At Least 6 Months If Storage Conditions Are Met. Purpose: General Construction And Repair Work (Concrete, Masonry, Plaster). Quality Requirements: New Product, Without Lumps, Factory Production, Compliance With Gost/St Rk., Product Name: Led Ceiling Lamp 6060/36W/6500K. Type: Led Ceiling Light For Recessed Or Surface Mounting. Size: 600 × 600 Mm. Power: 36 W. Color Temperature: 6500 K (Cool White Light). Luminous Flux: No Less Than 3600 Lm. Color Rendering Index (Cri): No Less Than 80. Ripple Coefficient: No More Than 5%. Supply Voltage: 220–240 V, 50 Hz. Light Source: Light Emitting Diodes (Led). Case Material: Powder Coated Steel. Diffuser Material: Matte Lighting Plastic. Case Color: White. Protection Class: Not Lower Than Ip20. Service Life: At Least 50,000 Hours. Installation Method: Built Into An Armstrong-Type Suspended Ceiling Or Overhead. Warranty: At Least 24 Months. Purpose: Lighting Of Medical, Administrative, Educational, Office And Other Premises. Quality Requirements: The Product Is New, Not Previously Used, Factory-Made, Without Mechanical Damage, Meeting Safety And Quality Requirements., Product Name: Water-Based Facade Paint (White). Type: Acrylic Water-Dispersion Facade Paint. Purpose: For External And Internal Finishing Works (Building Facades, Walls, Ceilings). Color: White. Packing: 25 Kg. Base: Acrylic Water Dispersion. Gloss Level: Matte. Properties: High Hiding Power; Good Adhesion To Concrete, Brick, Plastered Surfaces; Weather Resistance; Vapor Permeability (The Surface “Breathes”); Moisture Resistance; Fade Resistance. Consumption: Approximately 120–150 G/M² Per Layer (Depending On The Surface). Drying Time: 1–24 Hours (Depending On Application Conditions). Application Temperature: Not Lower Than +5 °C. Packaging: 25 Kg Plastic Bucket With A Sealed Lid. Storage Conditions: At Temperatures From +5 °C To +30 °C, In Tightly Closed Containers, Protected From Frost And Direct Sunlight. Shelf Life: 12–24 Months (Depending On The Manufacturer). Quality Requirements: New Product, Without Lumps And Delaminations, Factory Production, Compliance With Gost/St Rk., Product Name: Quicklime Lump. Type: Construction Binder Material. Ingredients: Calcium Oxide (Cao). Color: White, Grayish-White. Release Form: Lumpy (Large Pieces Of Different Fractions). Packaging: 25 Kg Bags. Purpose: Construction Work, Production Of Solutions, Whitewashing, Sanitary Treatment And Disinfection Of Premises. Properties: High Reactivity During Quenching; Antiseptic Effect; Alkaline Environment; Stability When Stored In Dry Conditions. Storage Conditions: Store In A Dry Place, Excluding Contact With Moisture And Water. Shelf Life: Unlimited If Storage Conditions Are Met. Quality Requirements: New Product, Without Foreign Impurities, Lump Structure, Factory Production, Compliance With Gost/St Rk., Product Name: Led Lamp A60. Lamp Type: Light-Emitting Diode (Led). Flask Shape: A60. Power: 12 W. Incandescent Lamp Equivalent: Not Less Than 100 W. Base: E27. Supply Voltage: 220–240 V, 50 Hz. Color Temperature: 6500 K (Cool White Light). Luminous Flux: No Less Than 1100 Lm. Color Rendering Index (Cri): No Less Than 80. Light Dispersion Angle: No Less Than 200°. Case Material: Plastic And Aluminum. Service Life: At Least 25,000 Hours. Energy Efficiency Class: Not Lower Than A+. Purpose: For Interior Lighting Of Administrative, Medical, Domestic And Other Premises. Quality Requirements: The Product Is New, Previously Unused, Factory-Made, Without Mechanical Damage., Product Name: Fissman F-20L Thermopot. Type: Electric Thermopot (Boiling And Maintaining Water Temperature). Volume: 20 L. Power: 2000 W. Heating Element Type: Closed Spiral. Case Material: Stainless Steel. Color: Black, Gray. Functions: Automatic Water Boiling; Maintaining The Set Temperature; Automatic Shutdown When Boiling; Power Indicator; Water Level Indicator. Control: Mechanical. Safety: Overheat Protection, Automatic Shutdown In The Absence Of Water. Purpose: For Use In Medical Institutions, Canteens, Offices And Places Of Public Service. Supply Voltage: 220–240 V, 50 Hz. Operating Conditions: Indoor Use At Normal Humidity. Quality Requirements: The Product Is New, Factory-Made, Without Damage, Fully Equipped., Product Name: Liquid Soap. Type: Liquid Toilet Soap With Dispenser. Volume: 0.5 L (500 Ml). Packaging: Plastic Bottle With Dispenser. Purpose: For Washing And Hygienic Treatment Of Hands. Scent: Various Flavors (Lemon, Apple, Aloe, Lavender, Sea Breeze Or Equivalent). Colour: Depending On The Aroma. Ph Level: Neutral Or Close To Neutral. Properties: Effectively Cleanses The Skin Of The Hands, Is Easily Washed Off With Water, Does Not Cause Irritation If The Conditions Of Use Are Observed. Consistency: Homogeneous Liquid Without Foreign Impurities. Storage Conditions: In Closed Packaging At The Temperature Recommended By The Manufacturer. Quality Requirements: The Product Is New, Factory-Made, In Undamaged Packaging, With A Remaining Shelf Life Of At Least 12 Months At The Time Of Delivery., Product Name: Dynamic Wastewater Pump Sd 16/25. Pump Type: Centrifugal, Cantilever, Horizontal, For Waste And Polluted Water. Productivity: 16 M³/H. Head: 25 M. Electric Motor Power: At Least 4 Kw. Rotation Speed: 2900 Rpm. Supply Voltage: 380 V, 50 Hz. Suction Pipe Diameter: 40 Mm. Discharge Pipe Diameter: 32 Mm. Body Material: Gray Cast Iron. Impeller Material: Cast Iron. Shaft Material: Steel. Shaft Seal Type: Stuffing Box. Maximum Temperature Of The Pumped Liquid: Up To +80 °C. Density Of The Pumped Liquid: Up To 1050 Kg/M³. Allowable Size Of Solid Inclusions: Up To 5 Mm. Purpose: Pumping Domestic, Municipal And Industrial Wastewater, Drainage And Contaminated Liquids. Quality Requirements: The Product Is New, Not Used, Factory-Made, Without Mechanical Damage.