Request For Quotation Purchasing Bedding

The Blanket Is One-And-A-Half Size. Product Size – 1.5 × 2.2 M. Filler Density – No Less Than 300 G/M². The Filler Is Holofiber, Thermally Bonded, Hypoallergenic, Non-Toxic, Without Foreign Odors, With High Elasticity And The Ability To Restore Shape After Deformation. The Cover Material Is Dense Microfiber Or Wear-Resistant Polyester With A Density Of At Least 85–100 G/M². The Material Should Be Durable, Pleasant To The Touch And Prevent The Filler From Moving. The Product Must Be Resistant To Repeated Industrial Washing, Disinfection Treatment And Retain Its Shape, Size And Thermal Insulation Properties During Operation. The Product Must Comply With The Requirements Of Tr Cu 017/2011 “On The Safety Of Light Industry Products”, Gost 30332-2015 “Feather And Down Products. General Technical Conditions (In Terms Of General Requirements For Finished Products), Gost 10530-79 Sewing Products. Labeling, Packaging, Transportation And Storage”, As Well As The Current Sanitary And Epidemiological Requirements Of The Republic Of Kazakhstan., Bedspread. Overall Dimensions: Width – 1.5 M, Length – 2.2 M. Fabric Type: Specialized Dense Polyester, Wear-Resistant Smooth Microfiber Or Dense Cotton Fabric With The Addition Of Polyester Fibers (Pique Type) Without A Pronounced Relief Pattern. The Fabric Must Have Dirt-Repellent Properties And Be Resistant To Snags And Pilling. Product Design: Two-Layer, Made Using Ultrasonic Stitching (Ultrastep) Or Classic Machine Stitching. It Is Allowed To Have An Inner Layer Of Hypoallergenic Synthetic Padding With A Density Of No More Than 80–100 G/M² To Preserve The Shape And Aesthetic Appearance. Color Design: Childrens Drawing. The Bedspread Must Withstand Multiple Cycles Of Industrial Washing At Elevated Temperatures, Disinfection With Chlorine-Containing Agents And Heat Treatment In Disinfection Chambers Without Loss Of Appearance, Shape And Consumer Properties. Materials Must Not Emit Toxic Substances, Have Foreign Odors Or Cause Skin Irritation. The Product Must Comply With The Requirements Of Tr Cu 017/2011 “On The Safety Of Light Industry Products”, Gost 10530-79 “Sewing Products. Labeling, Packaging, Transportation And Storage”, As Well As The Current Sanitary And Epidemiological Requirements Of The Republic Of Kazakhstan., Pillow For Medical Institutions. Size: 70 × 70 Cm. Filler Weight – At Least 600–700 G. Filler – 100% Siliconized Fiber (Holofiber) In The Form Of Balls. The Filler Must Be Elastic, Hypoallergenic, Non-Toxic, Not Absorb Odors And Moisture, Retain Its Shape After Repeated Washing And Not Clump. The Material Of The Bedspread (Cover) Is Dense Ultra-Quilted Polyester Or Wear-Resistant Microfiber With A Density Of At Least 85–100 G/M². The Fabric Must Securely Hold The Filling Inside, Be Durable, Resistant To Wear And Not Slip Inside The Pillowcase. Color Design – Color. The Product Must Withstand Repeated Washing In Industrial Washing Machines, Disinfection Treatment And Maintain Its Shape, Size And Performance Properties. The Filling And Material Of The Cover Must Be Resistant To The Development Of Mold, Fungi, Dust Mites And Bacteria. The Product Must Comply With The Requirements Of Tr Cu 017/2011 “On The Safety Of Light Industry Products”, Gost R 55857-2013 “Pillows And Blankets. General Technical Conditions, Gost 10530-79 Sewing Products. Labeling, Packaging, Transportation And Storage”, As Well As The Current Sanitary And Epidemiological Requirements Of The Republic Of Kazakhstan., Supply Of Bed Linen (Double Bed Linen) For Medical Institutions. The Set Should Include: Sheet - 1 Piece Measuring 1.5 M × 2.2 M, Duvet Cover - 1 Piece Measuring 1.5 M × 2.2 M, Pillowcase - 1 Piece Measuring 70 Cm × 70 Cm. Color Design - With A Childs Drawing. The Fabric Must Be Made From Specialized High-Strength Cotton Fabric Such As Plain-Dyed Calico Or Equivalent, The Composition Of The Fabric Is 100% Natural Cotton. The Fabric Density Must Be At Least 120 G/M² And No More Than 140 G/M². Products Must Be Designed For Intensive Use In Medical Organizations, Have High Wear Resistance And Resistance To Repeated Washing At Temperatures Up To 90 °C. The Material Must Retain Its Performance Properties After Repeated Treatment With Disinfectants, Including Chlorine-Containing Solutions, As Well As After Regular Ironing At High Temperatures. The Fabric And Finished Products Must Not Have Defects, Tears, Stains, Distorted Seams Or Other Manufacturing Defects. The Product Must Be New, Not Previously Used, Not Refurbished Or Previously Used. Delivery Is Carried Out In Manufacturers Packaging, Which Ensures The Safety Of The Goods During Transportation And Storage. The Quality Guarantee Of The Goods Is Provided By The Supplier In Accordance With The Legislation Of The Republic Of Kazakhstan. The Product Must Comply With The Requirements Of Gost 31307-2005 “Linen Products. General Technical Conditions, Gost 29298-2005 Cotton And Mixed Household Fabrics. General Technical Conditions Or Equivalent National And Interstate Standards.