Request For Quotation The Adapter Is Designed To Connect Devices With An Rs232 Interface (Com Port) To Personal Computers Via A Usb Port.

The Adapter Is Designed To Connect Devices With An Rs232 Interface (Com Port) To Personal Computers Via A Usb Port. The Product Must Be New, Not Used, And Ensure Stable And Correct Data Transfer. Device Type: Usb To Rs232 Interface Conversion Adapter (Com Port). Chipset: Prolific Or Equivalent In Functionality And Compatibility. Pc Connection Interface: Usb 2.0 Or Higher. Device Connection Interface: Rs232 (Db9 Male Or Female, Depending On Version). Operating System Support: Windows (Not Lower Than Current Versions), If Necessary, Compatibility With Linux/Macos Or Their Equivalents. Data Transfer Speed: Up To At Least 1 Mbps Or Higher (Depending On The Device). Power: Via Usb Port, Without The Need For An External Power Source. Cable Length: At Least 0.8 M (Or In The Form Of A Compact Adapter With A Cable). Indication: The Presence Of An Led Indication Of The Data Transfer Status (Tx/Rx) Is Desirable. The Device Must Provide Stable Operation Without Data Loss Or Connection Failures. The Housing Must Be Resistant To Mechanical Stress During Operation. The Connection Must Be Plug-And-Play Or With Minimal Installation Of Drivers. Usb-Rs232 Adapter - 1 Pc., Driver (On Media Or In The Form Of A Link), User Manual. Warranty Period - At Least 12 Months From The Date Of Delivery Of The Product. It Is Allowed To Supply Equivalent Goods With Characteristics No Worse Than Those Specified In This Technical Specification, The Label Printer Is Designed For Printing Barcodes, Text And Graphic Information On Self-Adhesive Labels In Medical, Warehouse And Administrative Institutions. The Equipment Must Be New, Not Previously Used, And Meet Reliability And Safety Requirements. Device Type: Desktop Thermal Label Printer (Direct Thermal Printing). Print Resolution: No Less Than 203 Dpi. Maximum Print Width: No Less Than 54 Mm. Maximum Media Width: Up To 60 Mm. Printing Speed: No Less Than 120 Mm/Sec. Print Type: Direct Thermal (No Ribbon Required). Media Supported: Roll-Type Thermal Labels, Continuous And Gap. Roll Diameter: At Least 100–127 Mm. Sleeve Diameter: 25–40 Mm. Sensors: Gap, Black Mark. Connection Interfaces: Usb 2.0 And Rs-232 (Or Usb 2.0 And Ethernet As An Option). Memory: At Least 4 Mb Flash And 8 Mb Sdram Or Equivalent. Thermal Label Printer - 1 Pc.; Power Cable And Adapter; Usb Connection Cable; User Manual. Self-Adhesive Thermal Labels, Size 29X20 Mm - At Least 1 Roll (Starter Set), Intended For Thermal Printing, With A High-Quality Adhesive Layer That Ensures Reliable Fixation On Various Surfaces. The Equipment Must Provide Clear And Consistent Barcode And Text Printing. The Design Must Be Reliable, With Easy Access To Loading Consumables. The Device Must Meet Electrical Safety Requirements And Have Protection Against Overheating. The Warranty Period Is At Least 12 Months From The Date Of Delivery Of The Goods. It Is Allowed To Supply Equivalent Equipment With Characteristics No Worse Than Those Specified In This Technical Specification, The Barcode Scanner Is Designed For Reading 1D And 2D Barcodes In Medical, Warehouse And Administrative Institutions. The Equipment Must Be New, Not Used, Meet The Requirements Of Reliability, Safety And Ensure Stable Reading Of Codes From Various Media. Device Type: Handheld/Stationary 2D Barcode Scanner With Stand. Supported Code Types: 1D (Linear) And 2D (Qr Code, Data Matrix, Pdf417, Etc.). Operating Mode: Manual And Automatic (Auto Scanning When Installed On A Stand). Scanning Technology: Image-Based Scanning. Reading Speed: At Least 200 Scan/Sec Or Equivalent In Performance. Reading Range: From 0 To At Least 250 Mm (Depending On Code Density). Scanning Angle: No Less Than 360° Rotation, Tilt And Deflection No Less Than ±60°. Connection Interfaces: Usb 2.0 (Hid Keyboard / Virtual Com), Rs-232 Or Usb-C Equivalent Is Allowed. Power Source: Via Usb Or External Adapter Indication: Light And Sound. Auto-Scan Mode: The Presence Of A Stand With An Automatic Response Function When A Barcode Is Detected. The Stand Must Provide Stable Vertical Placement Of The Scanner. The Device Must Provide Fast And Accurate Reading Of Damaged, Unclear And Low-Contrast Codes. The Case Must Be Shock-Resistant, Resistant To Drops From A Height Of At Least 1.5 M. The Degree Of Protection Is Not Lower Than Ip42 Or Equivalent. 2D Barcode Scanner – 1 Pc., Stand For Auto Scanning – 1 Pc., Usb Connection Cable – 1 Pc., User Manual – 1 Pc. The Warranty Period Is At Least 12 Months From The Date Of Delivery Of The Goods. It Is Permitted To Supply Equivalent Equipment With Characteristics No Worse Than Those Specified In This Technical Specification.