Bids Are Invited For Registration Of Prices For The Acquisition Of Dental Equipment.

Dental Rx Devicemobile Column Model On 04 Double Castors With Locking. U-Shaped Base. Tube Voltage 70 Kvp, Mains Voltage 220 V, Power 1200 Va. Digital Remote Control With All Equipment Commands And Connected To The Device By Coiled Cable. Exposure Time From 0.06S Up To 3.2S. Head With Minimum 300 Degree Rotation. It Comes With A Test Report For Leakage Radiation In Accordance With Ordinance Svs 453. The Device Must Comply With The Standards Required By Ordinance Svs 453 Of 06/01/98. Installation Under The Responsibility Of The Manufacturer And/Or Supplier, Who Must Indicate Authorized Assistance With A Technical Person Registered With Crea., Dental Cabinet With Sink And Clinical Drawer Module With A Top Of At Least 1 Meter Wide In Mdf With A Minimum Of 25 Mm Thick In White, Manufactured Entirely In 15 Mm High Mdf Density With Melamine Coating (Bp) In White Color On Both Sides, With Round Sink In Stainless Steel With At Least 30 Cm In Diameter, With Chrome Tap And Movable Spout And Electromagnetic Water Drive System (Pedal) 220V. Containing At Least 4 Drawers With Mdf Bulges Covered Internally And Externally In White Laminate With Steel Slides And A Door With 35Mm Hinges Equipped With Hydraulic Shock Absorbers. The Furniture Must Be Elevated From The Floor, Without Direct Contact Between The Structure And The Ground, Supported By Feet Made Of Anti-Corrosive Material (Stainless Steel Or Aluminum), With A Height Of 100 Mm And A Level Adjustment System For Adjustment On Uneven Floors. Assembly With Zinc-Plated Screws And Hidden Fixing System. Drawers And Door With Identical Chrome Handles In Aluminum Color. Minimum Nominal Dimensions: 100Cm (Length) X 85Cm (Height) X 50Cm (Depth). Assembly And Installation Under Suppliers Responsibility., Dental Counter Counter With A Top Of At Least 1 Meter In Length In Mdf With A Minimum Of 25 Mm Thick In White, Manufactured Entirely In 15 Mm High Density Mdf With Melamine Coating (Bp) In White On Both Sides. Aluminum Linear Handles. Two Doors With 35Mm Hinges Equipped With Hydraulic Shock Absorbers, With A Shelf. The Furniture Must Be Elevated From The Floor, With A Height Of 100Mm And A Level Adjustment System For Adjustment On Uneven Floors. Assembly With Zinc-Plated Screws And Hidden Fixing System. Minimum Nominal Dimensions: 100Cm (Length) X 85Cm (Height) X 50Cm (Depth). Assembly And Installation Under Suppliers Responsibility., Column Tray For Ultrasound, Support Tray For Ultrasound Device. It Must Allow Adaptation To Dental Chair Columns Measuring 1 ½ Inches (= 38, 10 Mm) To 2 Inches (= 50, 80 Mm). Usable Area Dimension: 30 X 24 Cm. Protruding Edges For Liquid Retention. Passable Adaptation, So As Not To Damage The Column Painting. Allow 360º Rotating Movements. Support At Least 5 Kg., Portable Electric Scalpelportable Electric Scalpel For Small Dental Clinical Surgeries. It Should Operate At Frequencies Four Times Above The Range Where Stimulation Of Muscles And Nerves No Longer Occurs. The Intensity And Distribution Of Heat Through The Tissue Can Be Changed By Varying The Mode Of Operation, Cutting, Blending And Coagulation. Output Power: Cut: 100 W Load: 500 Ohms, Blend: 60 W Load: 500 Ohms And Coagulation: 40 W Load: 500 Ohm. Power: Mains - 110/220 Bivolt (Automatic) – 50/60 Hz. Items That Should Be Included: 1 Power Cable