Bids Are Invited For Acquisition Of Furniture, Including Tables, Chairs, Cabinets, Shelves And Armchairs, Intended To Meet The Needs Of The Municipal Convention Center, Aiming At Adequate Ambience, Comfort, Functionality And Support For Administrative, Operational And Event Holding Activities, According To Established Specifications, Quantities And Conditions.

Auditorium Armchair With Retractable Seat And Folding Board Structure: Lower Part With Plate For Fixing To The Floor Made Of Nbr 6658 Steel Sheet With A Minimum Of 4.25Mm Thickness. Chair Support Structure Made Of Oblong Sae 1010/1020 Steel Tube Measuring At Least 16X30 Mm And Wall Thickness Of 1.90 Mm. Seat Support Support Made From Sae 1010/1020 Oblong Steel Tube Of At Least 16X30 Mm And 1.20 Mm Wall Thickness. Fixed Arm Fixing Support Made Of Sheet Steel With A Minimum Thickness Of 2.0 Mm. Wooden Side Fixing Support Made From Sheet Steel With A Minimum Thickness Of 3.18 Mm. Seat Rotation Bushing Made From Sae 1010/1020 Round Industrial Steel Tube Of At Least 19.05 Mm In Diameter And 1.90 Mm In Wall Thickness. Backrest Fixing Support Made Of Nbr 6658 Steel Sheet With A Minimum Thickness Of 3.75 Mm On Each Side Of The Backrest. Metallic Components Are Joined Using Mig Welding, Forming A Set For Subsequent Assembly Using Screws. Tilting Mechanism With Automatic Return Of The Seat By Counterweight With User Assistance. Supports Arm Without Board Injected In Integral Skin Textured Polyurethane, On Plastic Core Injected In Polyamide 6.6 With At Least 30% Glass Fiber Reinforcement. Supports Arm With Board Injected In Integral Skin Textured Polyurethane, On Plastic Core Injected In Polyamide 6.6 With At Minimum 30% Glass Fiber Reinforcement, Articulation Mechanism Injected In Polyamide 6.6 With At Minimum 30% Glass Fiber Reinforcement. The Armrest Is Fastened To The Structure Using Phillips Machine Screws Measuring ¼X 20 Fpp And Slotted Flange Nuts Measuring ¼X 20 Fpp Fixed Under Pressure To The Plastic Core. Side With The Central Part Made Of Plywood With A Minimum Thickness Of 10 Mm. Cladding Fixed By Clamps With Zinc Finish. Mdf Drawing Board, Approximate Measurements Of 250 Mm Wide And 300 Mm Deep, 18 Mm Thick And Pro Edges, Sofa With Three Seats Wooden Structure And Aluminum Legs Structure: Sofa Structure In 1 Thick Wood. Sofa Support Feet In Polished Aluminum. Seat: Made Of Plywood 10 Mm Thick Multilaminate With Expanded/Laminated Foam In Microcellular Flexible Polyurethane, Cfc-Free, With A Density Of 23 Kg/M³ And 20 Mm In Average Thickness, Expanded/Laminated Foam In Flexible Microcellular Polyurethane, With A Density Of 23 Kg/M³ And 7 Mm In Average Cushion Thickness. Expanded/Laminated Foam In Microcellular Flexible Polyurethane, With A Density Of 28 Kg/M³ And 150 Mm Average Thickness. Sofa Structure In 1” Thick Wood. Coating And Color: To Be Defined. Backrest: Made Of 18 Mm Thick Multi-Laminated Plywood With Expanded Foam/Laminated In Microcellular Flexible Polyurethane, With A Density Of 23 Kg/M³ And 40 Mm Of Average Thickness, With A Density Of 23 Kg/M³ And 30 Mm Of Average Thickness, With A Density Of 23 Kg/M³ And 7 Mm Medium Thickness. Sofa Structure In 1 Thick Wood. Covering And Color: To Be Defined. Sides: Made Of 3 Mm Thick Eucatex Sheet. Expanded/Laminated Foam In Microcellular Flexible Polyurethane, With A Density Of 23 Kg/M³ And 7 Mm Average Thickness. Sofa Structure In 1 Thick Wood. Coating And Color: To Be Defined. Finish: Painting Is Through Nano Ceramic Spray Bath, Powder Painting, Free Of Charge