Bids Are Invited For Acquisition Of Multistations And Popular Academies For The Elderly (Appi), With Installation.

Triple Ski, Manufactured With 316 Stainless Steel Tubes Measuring At Least 2’ ½ X 2 Mm; 1’ ½ X 3 Mm; 1’ ½ X 1.50 Mm; 1’ X 2.00 Mm. Drawn Stainless Steel Tube 2’ X 5, 50 Mm Schedule 80 (60, 30X49, 22). Metal Of At Least 30 Mm X 50 Mm Flat Bar At Least 3/16’ X 1 ¼’. Use Solid Pins, All Bearings (Double Bearings), Phosphate-Based Surface Treatment; Colored Thermo-Hardening Polyester Resin Protective Film With Electrostatic Powder Deposition System, Round Flexible Rubber Stops (53Mm Built-In Internal Plug Made Of Injected Plastic Measuring At Least 2’ ½ With A Spherical Finish Following The External Dimension Of The Tube. Injected And/Or Rubberized Plastic Finishes. High-Fixation 3M Destructive Reflective Sticker With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data. Height: 1542 Mm, Front: 2110 Mm, Side: 1250 Mm, Area: 13. 36 M² And Weight: 106. 5 Kg. The Contractor Must Provide The Installation Of The Equipment In The Locations Indicated By The Contractor., Vertical Rotation With Double Diagonal, Manufactured With 316 Stainless Steel Tubes Of At Least 3 ½ X 2Mm; 2’ 1’ X 1.50 Mm; ¾ X 1.20 Mm. Din Round Drawn Tube (55 Mm X 44 Mm). Stainless Steel Sheets Of At Least 3 Mm To Reinforce The Structure. Use Solid Pins, Phosphate-Based Surface Treatment; Colored Thermo-Hardenable Polyester Resin Protective Film With Electrostatic Powder Deposition System, Anchor With Flange Of At Least 230 Mm X 3/16, Laser Cut With Zinc Plated Fastening Screws Of At Least 5/8 Minimum 3/8’, Zinc Screws, Washers And Fastening Nuts. External Built-In Plug In Metal Measuring 2 ¼ And Internal Built-In Plug In Injected Plastic Measuring At Least 3 ½, Both With A Spherical Finish Following The External Dimension Of The Tube. Injected And/Or Rubberized Plastic Finishes. High-Fixation 3M Destructive Reflective Sticker With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data. Height: 1855 Mm, Front: 1228 Mm, Side: 758 Mm, Area: 8.9 M², Weight: 21 Kg. The Contractor Shall Provide The Installation Of The Equipment In The Locations Indicated By The Contractor., Triple Leg Pressure, Manufactured With 316 Stainless Steel Tubes Of At Least 4 X 3 Mm; 3’ ½ X 3.75; 2’ 2’ X 3 Mm; Stainless Steel Plates Of At Least 4.75 Mm To Reinforce The Equipment Structure And 2 Mm For The Bench And Back With Dimensions Of 335 Mm X 315 Mm And Printed With Rounded Edges. Drawn Stainless Steel Tube 2’ X 5.30 Mm X 49.22 Mm). Solid Pins Are Used. Anchor With Flange Of At Least 230 Mm X 3/16’, Washers And Fastening Nuts; External Built-In Plug In Metal Of 2, Internal Built-In Plug In Injected Plastic Of At Least 3 ½, Both With A Spherical Finish Following The External Dimension Of The Tube, Finishes In Injected And/Or Rubberized Plastic. High-Fixation 3M Destructive Reflective Sticker With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data. Height: 1540 Mm, Front: 1870 Mm, Side: 1870 Mm, Area: 14. 98 M², Weight: 63 Kg. The Contractor Must Provide Installation Of The Equipment At The Locations