Technical Plate Size 1000X1000 Thickness Δ30 Mm Technical Specification For Technical Plate Tmkshch (Heat-Frost-Acid-Alkali-Resistant) Gost 7338-90 Non-Molded Rubber Plates Are Intended For The Manufacture Of Rubber Products Used To Seal Fixed Joints Of Single Shock Loads, As Well As As Gaskets, Flooring And Other Non-Sealing Products. Used In Environments: Air In Rooms, Containers, Vessels; Nitrogen; Inert Gases At Pressure From 0.05 To 0.4 Mpa; Fresh, Sea, Industrial, Waste Water Without Organic Solvents And Lubricants; A Solution Of Salts With A Concentration Up To The Saturation Limit; Acids, Alkalis With A Concentration Of No More Than 20% At A Pressure From 0.05 To 10.0 Mpa; Working Environment Temperature From -40% To +80C., Technical Plate Size 1000X1000 Thickness Δ4 Mm Technical Specification For Technical Plate Tmksh (Heat-Frost-Acid-Alkali-Resistant) Gost 7338-90 Non-Molded Rubber Plates Are Intended For The Manufacture Of Rubber Products Used To Seal Fixed Joints Of Single Shock Loads, As Well As As Gaskets, Flooring And Other Non-Sealing Products. Used In Environments: Air In Rooms, Containers, Vessels; Nitrogen; Inert Gases At Pressure From 0.05 To 0.4 Mpa; Fresh, Sea, Industrial, Waste Water Without Organic Solvents And Lubricants; A Solution Of Salts With A Concentration Up To The Saturation Limit; Acids, Alkalis With A Concentration Of No More Than 20% At A Pressure From 0.05 To 10.0 Mpa; Working Environment Temperature From -40% To +80C., Technical Plate Size 1000X1000 Thickness Δ3 Mm Technical Specification For Technical Plate Tmkshch (Heat-Frost-Acid-Alkali-Resistant) Gost 7338-90 Non-Molded Rubber Plates Are Intended For The Manufacture Of Rubber Products Used To Seal Fixed Joints Of Single Shock Loads, As Well As As Gaskets, Flooring And Other Non-Sealing Products. Used In Environments: Air In Rooms, Containers, Vessels; Nitrogen; Inert Gases At Pressure From 0.05 To 0.4 Mpa; Fresh, Sea, Industrial, Waste Water Without Organic Solvents And Lubricants; A Solution Of Salts With A Concentration Up To The Saturation Limit; Acids, Alkalis With A Concentration Of No More Than 20% At A Pressure From 0.05 To 10.0 Mpa; Working Environment Temperature From -40% To +80C., Technical Plate Size 1000X1000 Thickness Δ5 Mm Technical Specification For Technical Plate Tmkshch (Heat-Frost-Acid-Alkali-Resistant) Gost 7338-90 Non-Molded Rubber Plates Are Intended For The Manufacture Of Rubber Products Used To Seal Fixed Joints Of Single Shock Loads, As Well As As Gaskets, Flooring And Other Non-Sealing Products. Used In Environments: Air In Rooms, Containers, Vessels; Nitrogen; Inert Gases At Pressure From 0.05 To 0.4 Mpa; Fresh, Sea, Industrial, Waste Water Without Organic Solvents And Lubricants; A Solution Of Salts With A Concentration Up To The Saturation Limit; Acids, Alkalis With A Concentration Of No More Than 20% At A Pressure From 0.05 To 10.0 Mpa; Working Environment Temperature From -40% To +80C.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
