Bids Are Invited For Hiring A Company To Carry Out Pedestrian Crossing Application Services Using Mechanical Extrusion And Supply Materials For Horizontal And Vertical Road Signage, Meeting The Needs Of The Marmeleirense Traffic Department - Demartran.

Tortoise Shell, Made With High Mechanical Resistance Polyester Or Synthetic Resin, In Yellow, White Or Red With All The Material For Its Attachment Included, According To The Needs Of The Department, Width 15 Cm, Height 4 Cm, With Fixing Pin, Average Weight 750 Grams. Installed, Flexible Cone In (Pvc) With Standard Specifications (Abnt) With Height 75 Cm Weight 3 To 4 Kg With Base 40 Cm According To The Needs Of The Department, Size 10X8x2 Cm. Installed, Street Identification Plate On Two Sides For Corners, Set Containing Pole, Fasteners And Two Plates, Measuring 50X25cm, Made Of Galvanized Steel Sheet 18Mm Or Acm 3Mm, With Type I Prismatic Film, Fully Reflective, With Galvanized Steel Support For Fixing In The Tube Measuring Width: 6 Cm, Height: 10 Cm, Flange Length: 3 Cm, And Can Be Directed According To The Direction Of The Road. With Support (Post) In Galvanized Steel, With An External Diameter Of 2, Length 3.00 M With A Wall Thickness Of At Least 3.00 Mm Galvanized; Sealed At The Top, With Anti-Spin System, Provided With Flat Iron Fins Steel Sae 1020 3/16, Of 8Cmx5cm With The Larger Lot Welded To The Pedestal, Which Must Be Fixed 30Cm From The Base Of The Support Post, Without Transverse Seams, The Installation Hole Must Be At Least 50Cm Deep And Concreted. Installed., Street Identification Plate On Two Sides, Which Can Be Directed According To The Direction Of The Road., Traffic Signage Plate, Measuring 2.00 5.50M.Finish: With Or Without Inspection Window, Provided With Screwed Cover Located 1.0 M From The Ground. Central Hole Of 26 Mm In Diameter For Passing The Power Cable. Passage Hole 80 Cm From The Lower Base With A Diameter Of 65 Mm. After Being Bent, Welded And Drilled, It Is Hot-Dip Galvanized Internally And Externally, With A Total Height Of 6.00 M Above The Ground And A Further 1.0 M Embedded In The Ground. Diameter At The Top Of 123 Mm And At The Bottom Of 187 Mm, Forming A Constant Conical Development. Anti-Rotation Fins, Located 100 Mm From The Lower Base And Welded To The Column At An Angle Of 180°. Arm Projection Of 5.0 M, With A Diameter Of 123 Mm At The Lower Base Next To The Fange And 76 Mm At The Beginning Of The Horizontal Part, Ensuring Constant Conical Development. The Horizontal Part Of The Arm Has A Constant Cylindrical Development Of 76 Mm Between The Point Of Agreement Of The Curve And The Tip Of The Arm. Fastening: Arm - Square Box, Made Of Sheet Steel Welded To The Column Structure, Located At The Top, Measuring 150 Mm On Each Side, Provided With 4 (Four) Threaded Holes, 1/2 Thread, 13 Threads Per Inch, For Fixing Up To 4 (Four). Installed., Traffic Sign Measuring 1, Made Of Galvanized Steel Sheet No. 18 Or Acm 3Mm, With Fully Reflective Film Prismatic Grade Type I, With Wooden Reinforcement Of 1.40X2.5X7cm Painted In Black Color; With Support Made Of Dry Eucalyptus Wood, 3 Meters Long, With A Thickness Of 8X8cm, Painted Black, The Hole For Installation Must Be At Least 50Cm Deep And Concreted. Install