Request For Quotation Goods For Household Needs

Lamp H7, Hdmi-Hdmi Cable, 8K, 10 Meters - Viewhdmi-Hdmi, M-M Length, M10 Hdmi2.1 Version Additionally • 3D Visual Effect • Audio And Video Synchronization • Maximum Resolution: 8K 60Hz • Color Depth 24, 30, 36, 48-Bit • High-Speed Data Transfer 48 Gbps • Audio Sampling Rate 24-Bit/192 Khz Max. • Pixel Formats Rgb/Ycbcr 4:4:4/Ycbcr 4:2:2/Ycbcr 4:2:0 • Supported Audio Formats Lpcm/Ac-3/Dts/Dts-Hd Master Audio/Dolbytruehd/Dts: X/Dolbyatmos ! • Supported Features: • Hdr 10, Hdr 10+, Dolby Vision Hdr • Earc Improved Audio Return Channel • Vrr Variable Refresh Rate • Qms Fast Media Switching • Qft Fast Frame Transport • Allm Automatic Low Latency Mode Dimensions And Weight Packaging Typebox Weight With Packaging0.68 Kg Warranty Period (Months)1, Ultrasound Gel, Light, Thick, 5L, White Enamel Pf-115. (Glossy) Description It Is A Suspension Of Rutile Titanium Dioxide And Other Pigments And Fillers In Pentaphthalic Varnish With The Addition Of A Drier, Solvents And Targeted Additives. Purpose Intended For Painting Metal, Wood And Other Surfaces Exposed To Weather Conditions And For Painting Indoors. The Enamel Film Is Resistant To Temperature Changes From Minus 50 To Plus 60 ºс. Technical Characteristics 1. Color Of Enamel Coating. Gloss Of The Coating According To A Photoelectric Gloss Meter, %, Not Less Than 50 5. Mass Fraction Of Non-Volatile Substances, %, Depending On Color 49-70 Color White 6. Degree Of Dilution To Viscosity 28-30 S According To A Vz-246 Type Viscometer With A Nozzle Diameter Of 4 Mm At A Temperature Of (20.0±0.5)ºс, %, Not More Than 20 7. Degree Of Grinding, Microns, No More Than 25 8. Covering Capacity Of The Dried Film, G/M2, No More, Depending On The Color 30-120 9. Drying Time To Degree 3 At A Temperature Of (20±2)ºс, Hours, No More, For Enamels Of Colors: 24 10. Elasticity Of The Film When Bending, Mm, No More Than 1 11. Strength Of The Film When Impacted Device Type U-1, Cm, Not Less Than 4 12. Coating Hardness According To A Pendulum Device Type Tml (Pendulum A), Relative Units, Not Less Than 0.10 13. Film Adhesion, Points, Not More Than 1 14. Resistance Of The Coating At A Temperature Of (20±2)ºс To The Static Influence Of Water, H, Not Less Than 2 15. Resistance Of The Coating To Static Influence 0.5% Detergent Solution, Min, Not Less Than 15 16. Resistance Of The Coating At A Temperature Of (20±2)ºс To The Statistical Influence Of Transformer Oil, H, Not Less Than 24 17. Gost Notes: When Using Enamels, Hot Drying Of The Coating At A Temperature Of (105-110) °C For 1 Hour Is Allowed. Application The Dried Coating Is Safe For Humans. Packaging Metal And Plastic Containers In Containers Of 20 Liters Each. Gost 6465-76 Odorless, Door Mat 1.80M*1.20M, Dirt-Retaining, Rubber