Switch • Number Of Ethernet Ports - At Least 26. • Number Of Poe Ports – At Least 24. • Poe Standard Support. • The Total Poe Budget Is At Least 230 W. • Data Transfer Speed On The Main Ports Is 10/100 Mbit/S. • Availability Of At Least 2 Ports With Data Transfer Speeds Up To 1000 Mbit/S. • Availability Of At Least 1 Sfp Port. • Availability Of Built-In Lightning Protection. • Led Indication Of Power Status And Port Operation. • Cooling System With Active Cooling (Fan). • Possibility Of Installation In A Telecommunications Rack, Wall Or Desktop Placement. • Operating Ambient Temperature – Up To +45 °C. • Permissible Relative Air Humidity - Up To 90% Without Condensation., Patch Cord (Patch Cord) For Local Area Network The Patch Cord Is Designed For Connecting Network Equipment And Organizing A Structured Cabling System. • Cable Type - Twisted Pair. • Cable Category - Not Lower Than Cat 6. • Shielding Type - Utp Or Equivalent With Improved Characteristics. • Connector Type - Rj-45 (8P8c) On Both Sides. • Number Of Pairs - 4. • Conductor Material: Copper. • Core Type - Stranded. • The Design Of The Connectors Is A Cast Factory Assembly. • Supports Data Transfer Rates - Up To 1 Gbit/S And Higher. • Cable Length - According To Customer Needs (At Least 1 Meter). • Color - As Agreed With The Customer. • Compliance With International Standards For Structured Cabling Systems., Technical Specification The Interactive Panel Is Intended For Use In Educational Institutions, Conducting Lessons, Presentations And Interactive Classes. Key Features: • Screen Diagonal - At Least 75 Inches. • Panel Type - Interactive Touch. • Screen Resolution – At Least 3840 × 2160 (4K Ultra Hd). • Built-In Operating System Based On Android Version No Lower Than 14. • Processor - At Least 8 Cores. • Ram - At Least 8 Gb. • Built-In Memory - At Least 128 Gb. • Supports Simultaneous Touching - At Least 40 Points. • Response Time - No More Than 6.5 Ms. • Viewing Angle – No Less Than 178°. • Contrast – At Least 5000:1. • Screen Refresh Rate - At Least 60 Hz. • Brightness – At Least 400 Cd/M². • Availability Of An Ops Slot For Installing An Additional Computing Module. • Supports Wi-Fi And Bluetooth Wireless Technologies. • Bluetooth Version - Not Lower Than 5.0. • Wi-Fi Version - At Least Wi-Fi 5 Or Equivalent. Connection Interfaces: • At Least 2 Hdmi Ports. • At Least 2 Usb 2.0 Ports. • At Least 2 Usb 3.0 Ports. • At Least 1 Usb Touch Port. • At Least 1 Rj-45 Port. • At Least 1 Vga Input. • At Least 1 Vga Audio Input. • At Least 1 Audio Output (Earphone). • At Least 1 Microphone Input. • At Least 1 Tf Card Slot Or Equivalent. Additional Requirements: • Anti-Glare Screen Coating. • Protective Anti-Vandal Coating Of The Screen. • Built-In Speaker System. • The Number Of Built-In Speakers Is At Least 2. • The Total Power Of The Speaker System Is At Least 30 W. • Possibility Of Wall Mounting. Equipment: • Interactive Panel — 1 Pc. • Marker For The Interactive Panel - At Least 2 Pcs. • Remote Control — 1 Pc. • Power Cable — 1 Pc. • Wall Mounting Kit - 1 Set. • User Manual And Warranty Card., The Patch Panel Is Designed For Organizing And Switching Lines Of A Structured Cabling System In Telecommunication Cabinets And Racks. • Category – Not Lower Than Cat 5E. • Number Of Ports - At Least 48. • Port Type - Rj-45 (8P8c). • Supported Frequency Band - At Least 100 Mhz. • Designed To Mount In A Standard 19-Inch Telecommunications Rack Or Cabinet. • Height - No More Than 2U. • Idc Contact Type - Compatible With 110 And Krone Technologies Or Equivalent. • Supports Cable Connections From 22 To 26 Awg. • Presence Of Port Markings On The Front Panel. • Case Material: Metal With Anti-Corrosion Coating. • Color - Standard For Telecommunications Equipment. • Compliance With International Standards For Structured Cabling Systems., Wireless Wi-Fi Hotspot Ceiling (Or Wall) Wireless Access Point For Organizing A Corporate Wi-Fi Network. • Supports Ieee 802.11A/B/G/N/Ac Standards. • Dual Band Operation: 2.4 Ghz And 5 Ghz. • The Total Wireless Data Transfer Speed Is At Least 1300 Mbit/S. • Data Transfer Speed In The 2.4 Ghz Range Is At Least 450 Mbit/S. • Data Transfer Speed In The 5 Ghz Band Is At Least 867 Mbit/S. • Support For Mu-Mimo Technology. • Availability Of At Least 1 Ethernet Port 10/100/1000 Mbit/S. • Supports Power Supply Using Poe Technology. • Availability Of Built-In Omnidirectional Antennas. • Supports Centralized Control Via Software Or Hardware Controller. • Supports Seamless Roaming Between Access Points. • Mesh Network Support. • Supports Automatic Distribution Of Clients Between The 2.4 Ghz And 5 Ghz Bands (Band Steering Or Equivalent). • Possibility Of Installation On The Ceiling Or Wall. • Designed For Indoor Use.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
