Bids Are Invited For Eventual And Future Acquisition Of Plates, Posts And Traffic Signaling Materials, All According To The Attached Terms Of Reference.

Hot-Dip Galvanized Post 2, New, With Transverse Reinforcement At The Base, Drilled, Comes With Screw, Washer, Nut And Cap, Measuring At Least 03 Meters In Height And Wall Thickness Of At Least 02 Mm, Measuring At Least 03 Meters In Height And Wall Thickness Of At Least 03 Mm, Galvanized Sheet Plate, New, With Fully Reflective Painting And Other Characteristics Of The Material In Full Compliance With Ctb Code R1 (Stop Sign)., With Fully Reflective Painting, Measuring At Minimum 30 Cm At Least 50 Cm In Diameter And Other Characteristics Of The Material In Full Compliance With Ctb Code R6c (No Stopping And Parking Signs). And Other Characteristics Of The Material In Full Compliance With Ctb Code A18 (Spring Break Signaling)., Measuring At Minimum 50 Cm In Diameter And Other Characteristics Of The Material In Full Compliance With Ctb Code R19 (Maximum Allowed Speed Signaling Of 40Km/H)., Measuring At Minimum 50 Cm In Diameter And Other Characteristics Of The Material In Full Service With Ctb Code R3 (Forbidden Direction Signage)., Measuring At Least 50 Cm In Diameter And Other Characteristics Of The Material In Full Service With Ctb Code R33 (Circulation Signage In The Roundabout)., Measuring At Least 50 Cm In Diameter And Other Characteristics Of The Material In Full Service To The Ctb Code R25a (Left Turn Sign)., Measuring At Least 50 Cm In Diameter And Other Material Characteristics In Full Compliance With The Ctb Code R25b (Right Turn Sign)., Measuring At Least 50 Cm In Diameter And Other Material Characteristics In Full Compliance With The Ctb Code A45 (No Exit Street Signage)., Measuring At Least 50 Cm In Diameter And Other Characteristics Of The Material In Full Compliance With The Ctb Code R5a (Signage Indicating No Return To The Left)., Measuring At Least 50 Cm In Diameter And Other Characteristics Of The Material In Full Compliance With The Ctb Code R5b (Signage Of Returning To The Right Is Prohibited)., Measuring At Least 50 Cm In Diameter And Other Characteristics Of The Material In Full Compliance With Ctb Code R9 (Signaling For Prohibited Traffic Of Trucks)., Measuring At Least 50 Cm In Diameter And Other Characteristics Of The Material In Full Compliance With Ctb Code R24a (Signaling In The Direction Of Circulation Of The Road Or Track)., Galvanized Sheet Sign With A Minimum Thickness Of 1.25 Mm, Measuring At Least 60 Cm Minimum 50 Cm Long X 80 Cm High., Zinc-Plated Square Sheet With A Minimum Thickness Of 1, With Minimum Measurements Of 50 Cm Long Length