Tenders Are Invited For Renovation Of The Roof Covering Of Residential Building No. 2 In Nietoperek

1.1. The Scope Of Works Includes: 1) Preparatory Works And Demolition Works: - Setting Up The Scaffolding, - Construction Of Scaffolding At The Chimneys, - Construction Of Protective Roofs Over The Entrances To The Building, - Preparation Of Space For Storing Construction Waste, - Dismantling Of The Roof Covering Made Of Plain Tiles, - Dismantling The Roof Truss Elements - Roofing With A Batten Spacing Of 16 Cm, - Dismantling Of The Roofing Felt Covering On The Roofs. Wooden, - Dismantling Of Roof Truss Elements - Formwork Of The Roof With Jointed Boards And Straight Roof Trusses - Dismantling Of Gutters And Downpipes Made Of Sheet Metal, - Dismantling Of Sheet Metal Flashings Of Fire Walls, Eaves, Collars, Cornices, Etc., - Dismantling Of Parts Of Chimneys Up To The Ground Floor Ceiling, - Dismantling Of The Roof Hatch, - Waste Management.2) Masonry Works:- Building New Multi-Flue Chimneys With Bricks With A Cross-Section Of 1/2X1/2 - Building New Chimneys Above The Roof With Clinker Bricks, 3) Carpentry And Insulation Works: - Reinforcing The Rafters With Double-Sided And One-Sided Studding With Thick Boards. 32 Mm, - Reinforcement Of Other Structural Elements Of The Roof With Damage Caused By Biological Corrosion, - Installation Of Thermal And Anti-Sound Insulation With Mineral Wool - Vertically From Dry-Laid Boards, - Fixing The Roof Foil/Membrane On The Rafters4) Covering Works: - Covering The Roof Slope With 38X50 Mm Battens With A Spacing Of 16-24 Cm Made Of Saturated Sawn Timber, - Covering Unplanked Roofs With Ceramic Tiles, - Covering Roofs With Coated Steel Tiles, - Finishing Roof Gables With Gable Tiles, - Construction Of A Ridge In A Roof Covered With Profiled Ceramic Tiles, Including Installation Of Additional Elements, - Installation Of A Roof Hatch With A Universal Flashing, - Installation Of Chimney Sweep Benches, - Installation Of Snow Protection With A Fence, 5) Gutters And Sheet Metal Flashings: - Flashings With An Expanded Width Of Up To 25 Cm Made Of Galvanized Sheet Metal - Gutter Strip - Flashings With An Expanded Width Of Over 25 Cm Made Of Galvanized Sheet Metal - Chimney, Valley, - Installation Of Semi-Circular Roof Gutters With A Diameter Of 15 Cm Made Of Tytan-Cynk Sheet Metal, - Installation Of Semi-Circular Roof Gutters With A Diameter Of 12 Cm Made Of Galvanized Sheet Metal, - Installation Of Downpipes With A Diameter Of 10 Cm Made Of Tytan-Cynk Sheet Metal, - Installation Of Downpipes With A Diameter Of 9 Cm Made Of Tytan-Cynk Sheet Metal, 6) Finishing Works: - Construction Of Grates For Plasterboard Cladding, - Construction Of Plasterboard Cladding,