Tenders Are Invited For Replacing The Artificial Grass Surface On The Playing Field At Primary School No. 3 In Otwock

3.1 The Subject Of The Contract Consists Of: 1) Basic Order (Guaranteed Order): As Part Of The Order, The Contractor Will Be Obliged To Replace The Synthetic Grass Surface Of The Football Pitch And Replace The Goals. 2) Optional Order (Covered By The Option Right) Including: Disposal Of The Removed Surface, 3.2 All Works Related To The Investment Should Be Performed On The Basis Of The Description Of The Subject Of The Order, Bill Of Quantities And Attached Documentation.3.3 Documents Listed In The Above-Mentioned. Section, Specification Of The Terms Of The Order And The Contractors Tender Offer Constitute An Integral Part Of The Contract And Are Stored In The Public Procurement Department.4. The Contractors Responsibilities Include: 4.1 Replacement Of The Synthetic Grass Surface. The Existing, Degraded Synthetic Grass Surface On The Pitch With An Area Of ​​Approx. 1,027 M2 Must Be Dismantled And Disposed Of On Its Own. The Substrate On Which The New Surface Is To Be Laid Should Be Prepared In Accordance With The Manufacturers Instructions And Should Be Dry, Even, Free Of Contamination, Strong And Stable, And Preceded By Adding, Leveling And Compacting Approximately 4 Cm Of Fine Sand. The Contractor Will Be Obliged To Adjust The Pitch Elevations To The Existing Edges. Technical Parameters Of The Surface: 1. Fiber Composition - Polyethylene (Pe) 100%2. Fiber Type And Cross-Section: Straight Monofilament Fiber (100%), E.G. Propeller-Shaped3. Backing: Latex Or Polyurethane4. Fiber Height Min 58 Mm5. Thickness Of Each Fiber Min. 300Micron6. Fiber Weight (Dtex) Min. 22/0007. Number Of Fibers Min. 150,000/M28. Bunch Pulling Force After Water Aging Min. 100N9. Fiber Weight Min. 1950G/M210. Total Grass Weight Min. 3100G/M211. Color Min. 2 Shades In One Bunch12. Strength Of Glued Joints After Aging Min. 200N/100Mm13. Filling: Consisting Of Quartz Sand And Recycled Epdm Granules In Black In The Amount Consistent With The Laboratory Test4.2 Replacing The Goals The Existing Equipment Should Be Dismantled (2 Game Goals). The Goals Are In Poor Technical Condition - Therefore, New Factory Equipment Must Be Delivered And Installed (Game Goal 2 Pcs). Goals Dimensions: 3.0X2.0 M, Depth 80/100 Cm (Top/Bottom). The Main Frame Of The Goal Is Made Of Square Steel Profiles, Min. 80X80mm, Galvanized, Powder Coated. Goal Posts Mounted In Sleeves According To The Manufacturers Technical Data Sheet. Attaching The Net To The Main Frame With Plastic Hooks. Permanently Mounted Net Support Bars. Net With A Mesh Size Of 10X10cm Made Of Knotless Polypropylene - 2 Pcs. The Dismantled Goals Will Be Installed By The Contractor On One Of The Two Remaining Pitches With A Polyurethane Or Multifunctional Artificial Grass Surface, Including The Installation Of Sleeves And The Necessary Reconstruction Of The Surface. The Final Location Will Be Indicated By The Ordering Party At The Implementation Stage. 4.3 Reclamation Of The Area Between The Pitch And The Fence As Part Of The Reclamatio