Tenders Are Invited For Construction Of Two Service And Commercial Buildings At Powstańców Wielkopolskich Street.

1. The Subject Of The Order Is The Construction Of Two Service And Commercial Buildings At Powstańców Wielkopolskich Street. 2. The Subject Of The Order Is The Construction Of 2 Detached Service Buildings, 1 Storey High, Without A Basement, Containing A Total Of 3 Service Premises. The Development Of The Area Includes The Construction Of Buildings, Reconstruction Of The Existing Paved Area - Paths And Access Roads To The Building, Expansion Of The Existing Parking Lot With Additional Parking Spaces, Development Of Part Of The Existing Paved Area As A Green Area - A Planter For Greenery And The Construction Of An Advertising Pylon.3. Characteristic Technical Parameters Of The Buildings:• Volume - Building No. 1: 673.19 M3 - Building No. 2: 422.50 M3 - Total: 1095.69 M3• Building Area - Building No. 1: 167.92 M2 - Building No. 2: 113.05 M2 - Total: 280.97 M2• Total Area - Building No. 1: 167.92 M2 - Building No. 2: 113.05 M2 - Total: 280.97 M2• Usable Area - Building No. 1: 141.39 M2 - Building No. 2: 93.49 M2 - Total Buildings No. 1 And No. 2: 234.88 M2• Height Of Buildings No. 1 And No. 2: 3.85 M• Length: Building No. 1: 12.18 Mbuilding No. 2: 13.17 M• Width Of Building No. 1: 14.96 Mbuilding No. 2: 10.78 M• Number Of Storeys: 1.4. The Following Installations Are Planned: 1) Electrical Installation - The Installation Includes External Lighting Installation, Internal Lighting Installation And Installation Of Plug Sockets, Installation Of Equipotential Bonding, Surge Protection And Lightning Protection Installation. The Cable Line Supplying The Cabinet Together With The Cabinet Will Be Designed And Implemented By The Energy Supplier.2) Cold And Hot Utility Water Installation - The Cold Water Installation Will Be Powered By Connection To The Connection, With Independent Switching On And Measurement Of Each Premises. Preparation Of Domestic Hot Water Using Local Electric Heaters. The Method Of Connecting The Heaters Is In Accordance With The System Manufacturers Guidelines. Cold And Hot Water Pipes Will Be Distributed From The Utility Rooms, Supplying Individual Utensils In The Building. 3) Sanitary Sewage System - Sewage Is Discharged To The Connection, With Each Apartment Being Turned On Independently. A Domestic And Utility Sewage System Is Being Designed, Discharging Sewage From Sanitary Utensils Located In The Building To The External Installation And Connection. Rainwater And Meltwater Discharged Into The Stormwater Sewage System. 4) Ventilation Installation - The Building Is Designed With Supply And Exhaust Ventilation Using Ventilation Units With Heat Recovery. Each Premises Will Have A Separate Ventilation Unit With Heat Recovery. The Control Panels Will Be Installed In Social Rooms Under The Roof Of The Building. The System Will Consist Of: A Ventilation Unit With A Heat Exchanger (Recovery), Air Intake And Exhaust, Ventilation Ducts With Regulating, Supply And Exhaust Fittings, Elements Ensuring Comfort Of Use, Such As Appropriate Hangers,