Bids Are Invited For Purchase In Installments Of Personal Protective Equipment (Ppe), Collective Protective Equipment (Epc) And Signaling Materials, Designed To Ensure The Protection Of Municipal Employees And The Adequate And Safe Development Of Operational Activities In The Public Sectors.
Bids Are Invited For Purchase In Installments Of Personal Protective Equipment (Ppe), Collective Protective Equipment (Epc) And Signaling Materials, Designed To Ensure The Protection Of Municipal Employees And The Adequate And Safe Development Of Operational Activities In The Public Sectors.
Scratch-Type Leather Apron 1.20M Cow Shave Type Leather. Minimum Thickness: 1.2 Mm., Waterproof Pvc Apron With Lining (1.20 For Side Adjustments, With Side Sewn Hem. Approximate Size (1.70M). Certificate Of Approval (Ca) Issued By The Ministry Of Labor And Employment (Mte)., White Rubber Boot Longoc Upper/Polyester Lining: Certificate Of Approval (Ca) Issued By The Ministry Of Labor And Employment (Mte). (Size 36 To 45) (Submit Catalog Attached To The Proposal File), Black Rubber Longoc Upper Boots/ Polyester Lining: Certificate Of Approval (Ca) Issued By The Ministry Of Labor And Employment (Mte). (Size 36 To 45) (Submit Catalog Attached To Proposal File), Seg. Leather Boot, Biq. Carb Steel. 1045 And Carbon Palm And Stainless Steel Insole: Safety Boot With 1045 Carbon Steel Toe Cap Resistant To 200J Impact, With A Thickness Of 1.5Mm And Anti-Corrosive Electrostatic Painting, Stainless Steel Insole Resistant To 110Kg Of Puncture, Padded Back, Made 100% In Upper Pieces, Upper And Heel In Black Relax Type Leather With A Thickness Of 15 To 17 Lines, Popularly Called “Raspa”, Elastic Closure On The Sides, Internal Lining In Short Fiber Non-Woven Fabric With A Minimum Thickness Of 1.9 Mm, Mounting Insole Sewn To The Upper Using The Strobel System, In Needled And Resined Polyester With A Thickness Of 2.0Mm, Hygienic Insole In Antifungal/Antibacteria Eva, Composed Of Microdots That Provide Absorption And Desorption Of Sweat, Shaft Height 113Mm, Weight Per Foot Of Footwear 0.405Kg, Based On No. 40 And Bidensity Sole, With The 1St Layer (Midsole) Softer And Lighter, With A Density Of 0.0. 4G/Cm³ Providing Greater Comfort; And The 2Nd Layer (Sole) Is More Compact With A Density Of 1.0 G/Cm³, More Resistant To Abrasion With An Anti-Slip System Made Up Of Special Grooves Measuring 3 Mm In Height And 6 Mm In Width. Brand: Marluvas Or Similar With Your Due Ca (Certificate Of Approval). It Is Mandatory To Attach The Product Technical Data Sheet Next To The Proposal File., Bot. Mon. Leather With Biq. Carb Steel. 1045 And Safety Boot Made Of Leather With Carbon Steel Toe Cap And Stainless Steel Insole: Safety Boot With 1045 Carbon Steel Toe Cap Resistant To 200J Impact, Bot. Mon. Leather With Biq. Pvc And Elastic Padded Back, Long Sleeve Shirt With Protection. Solar Upf 50+ Long-Sleeved Shirt Made From Technological Fabric, With Upf 50+ Sun Protection, Proven By A Technical Report Or Manufacturers Certificate: With A Minimum Blockage Of 98% Of Uva And Uvb Rays, Thermal Properties, Thermal Comfort, Resistance And Durability, Suitable For Prolonged Exposure To The Sun. Fabric Composition: Polyamide (Pa): Minimum 80%, Elastane: Up To 20%. Minimum Weight: 140 G/M², Maximum Weight: 220 G/M². Permanent Non-Removable Protection With Washes, Quick Drying, High Breathability, Bidirectional Elasticity, High Mechanical And Abrasion Resistance. Unisex Modeling. Crew Neck Or Reinforced Round Neck. Refo Seams
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
