Bids Are Invited For Acquisition Of Parts For Installation Of New Eta Pump

Cast Iron Wide Tolerance Adapter/Joint, With One Flanged End And Another Pouch-Shaped End. The Bag Side Must Be Capable Of Mating To A Range Of Diameters (Embracing Pipes From Approximately 151 Mm To 182 Mm) And Serve, Rubber Sealing Washer, Nominal Diameter (Dn) 150Mm., Fixing Set Containing Nuts, Bolts And Washers For Flange Pn10, Dn 150Mm In Galvanized Steel. Composed Of 8 M20 Screws, 8 M20 Nuts And 16 M20 Washers Per Set., Fixing Set For Flange Pn10, Dn 150Mm, In Galvanized Steel, With 15Cm Through Screws. Composed Of 8 Screws, 8 Nuts And 16 Washers Per Set, With 20 Cm Through Screws. Composed Of 8 Screws, 90 Degree Curve With Pn 10 Flanges, Cast Iron Material, Concentric Reduction With Flanges (Special Piece), In Carbon Steel, With Electrostatic Painting. Dimensions: Dn 125 X 150Mm, Exact Length 0.20M. The Dn 125 Flange (5) Must Meet The Ansi B 16.1-125 Lb Standard And The Dn 150 Flange (6) The Din Pn 10 Standard., Tube With Flanges Pn 10, Dn 150 Mm, Length Of 0. 12 M (Special Piece), Carbon Steel Material, Mandatory With Painting (Preferably Electrostatic)., 33 M, Cast Iron Or Carbon Steel Material, 41 M, Wafer Type 6 Butterfly Valve, Dn 150, Cast Iron Body, With 304 Stainless Steel Disc, Epdm Seal And Pressure Class 150 Lbs., Gate Valve With Pn 10 Flanges, Handwheel Drive, Without Handwheel, Check Valve Type Wafer, Class Pn 10/16