Tenders Are Invited For Balloon Catheters – Catheters For Aortic Valvuloplasty

Balloon Catheters – Catheters For Aortic Valvuloplasty. The Subject Of The Order Is The Supply Of Catheters For Aortic Valvuloplasty - For A Period Of 36 Months. The Bidders Offer Must Meet The Complete Assortment And Must Meet All The Requirements Defined Below For The Technical And Medical Parameters Of The Subject Of The Contract. If The Offer Does Not Meet Any Of The Requirements Stated In This Description Or Does Not Contain Any Of The Required Items, It Will Not Be Included In The Evaluation And The Applicant Will Be Excluded From The Evaluation Of The Offers Of This Competition. Aortic Valvuloplasty Balloon, With Self-Centering Construction Special Medical Material For Interventional Cardiology, Focusing Mainly On Aortic Valvuloplasty Balloons. The Catheter Must Be Compatible With A 0.035 Guide And The Balloon Must Have A Size Range Of At Least 14 To 30 Mm In Diameter (In 2-3 Mm Increments), Balloon Lengths Must Include 40, 50, 60 Mm. Balloon Insufflation Must Take Place Sequentially, After Insufflation Of The Proximal And Distal Parts, The Central Part Of The Balloon, Which Has A Smaller Diameter Than The Proximal And Distal Parts, Is Insufflated Part. Catheter Length At Least 110 Cm. Balloon For Aortic Valvuloplasty, With Self-Centering Construction, Balloon For Aortic Valvuloplasty, Straight Special Medical Material For Interventional Cardiology With A Focus On Aortic Valvuloplasty Balloons In Addition To Tavi. The Catheter Must Be Compatible With A 0.035 Guide Scale At Least In The Range Of Diameters 14 To 33 Mm (Graduated By 2-3 Mm), The Length Of The Balloon Must Include At Least 40 And 50 Or 60 Mm, For Diameters 18-30 Mm Also A Length Of 45 Mm. Catheter Length At Least 100 Cm. Estimated Number Balloon For Aortic Valvuloplasty, Equal To 150 Pcs. In Order To Demonstrate The Fulfillment Of The Requirement Set By The Public Contracting Authority In This Part Of The Tender Documents, It Is Required To Submit The Completed Annex No. 10 Of These Tender Documents. From The Completed Annex No. 10 Must Clearly Show That All Products Offered For The Relevant Item Of The Subject Of The Contract Meet The Minimum Technical Characteristics And Values ​​Of The Relevant Item Of The Subject Of The Contract Required By The Public Contracting Authority.