Tenders Are Invited For Construction Of Street Lighting In Kolbuszowa Dolna

The Task Includes The Construction Of Lighting For The Municipal Road (District Road No. 1256), Connecting Wiejska Street With The National Road No. 9 In Kolbuszowa Dolna, Which Includes The Construction Of A Yakxs 4X35 Mm2 Cable Line With A Length Of Approx. 175 M With A Fezn 4*25 Mm Band, Installation Of 4 Pieces Of Steel Lighting Poles In Ral 9011 Color, 8 M High, With Led Fixtures Mounted Directly On The Poles. Ral 9011 Color Luminaires With Factory-Installed Nema 5/7 Pin Or Zhaga Sockets, Along With Controllers Compatible With The Existing Smart City Street Lighting Control System, Marked In The Diagram As O1 To O4. Luminous Flux Min. 3876 Lm. The Ssp-1 Box With Equipment Should Be Installed On The Existing Pole 38/5. The Investment Is A Continuation Of The Previously Started Construction Of Lighting At Ul. Wiejska, Therefore The Shape Of The Luminaires Should Be Similar To The Previously Built Ones. After Construction, The Task Should Be Submitted For Acceptance To Pge Dystrybucja Rejon Energetyczny Mielec And Completed With Positive Acceptance. The Construction Site Runs Along A Narrow Road (With Sides Approximately 4 M Wide), On Which Residents Must Be Able To Access The Property During The Works. After Construction, The Area Should Be Tidied Up And A Handover Protocol Handed Over To The Investor. The Cable Line Runs Largely Through Private Land, Therefore The Time Of Work As Well As The Method Of Execution Should Be Agreed With The Property Owners. A Prior Visit To The Field Is Advisable. Before Starting Work, The Materials To Be Built-In Must Be Approved With The Investor. Minimum Requirements For Control And Led Luminaires: The Offered Lighting Control And Management System For Each Luminaire Must Be Integrated With The Smartly.City System Already Installed In The Kolbuszowa Commune. The System Must Have Functionality At Least To The Extent That Is Already Installed And Operated By The Ordering Party. As Part Of The Delivery, The Ordering Party Expects The Delivery Of System Controllers Built Into Each Offered Fixture In The System - The Fixture Is Equipped With A Nema 5/7 Pin Socket, System Controller And Current Jumper, Equipped With A Plug Suitable For Installation In This Socket. The Controllers Must Be Universal - Ensuring Control Of Both The Digital Dali Signal And The Analogue 0-10 V Signal. Key Parameters Of The System Controller: Supply Voltage 230V, Impact Resistance Ik Minimum 06, Ip Tightness Level Minimum 66, Minimum Operating Temperature Range -40C To +50C, Radio Communication In The Unlicensed Frequency 868Mhz (In Accordance With The En 300 220 Standard) For Already Installed By The Ordering Partys Base Stations In The Kolbuszowa Commune. The Guardian Of Our Street Lighting Control System Is Isc Spółka Z O.O. Street Krakowska 140A, 34-120 Andrychów.Led Luminaires1) Housing Made Of Die-Cast Aluminum, The Upper Part Of The Body Is Made Of One Element, Free Of Joints, Hinges And Ribs2) Powder-Coated Body With Electrostatic