Tenders Are Invited For Reconstruction Of The Playground In Barczkowice

The Subject Of The Order Is The Implementation Of The Task Titled: Reconstruction Of The Playground In Barczkowice Including Surveying Services. A Detailed Description Of The Subject Of The Contract Was Included In The Design Documentation (Construction, Technical And Executive Design), Bill Of Quantities And Stwior Constituting An Annex To This Contract. The Ordering Party Informs That It Is Making The Following Changes In Relation To The Attached Design Documentation And Stwior: 1) Changing The Surface From Epdm Boards To A Polyurethane Surface - Poured On Crushed Stone, 2) Description Of The Device 8614 Is Replaced By The Following: Materials:* Poles: Made Of Coniferous Wood (Scandinavian Spruce) With A Cross-Section Of 90X90 Mm, Coreless, Glued In Layers With Polyurethane Adhesives Completely Resistant To Moisture. Wood Subjected To A Three-Stage Impregnation Process. Poles Attached To The Ground Using Powder-Galvanized And Powder-Coated Steel Anchors.* Roof: Made Of Metal Connection Sheet Metal Shaped By Progressive Bending And Elements Made Of Rotomolding Or Wdpe/Hpl Board.* Roof With A Spire: The Entire Component, Including The Spire And The Lower Part Of The Roof, ≈ 3.8 M High. The Spire Is Made Of A Steel Rod With A Diameter Of 42.4 Mm, Protected Against Corrosion By Powder Coating And Powder Galvanizing. The Conical Roof And Its Base Are Made Of Ldpe Polyethylene Rotomoulding Or Hdpe Boards Connected In A Conical Manner.* Arcades: Made Of Ldpe Material Or Hdpe Boards Using The Rotomoulding Method.* Walls: Made Of Colorful Three-Layer Hdpe Polyethylene, 15 Mm Thick.* Platforms: Made Of Anti-Slip 18 Mm Thick Hpl Board In Anthracite Color, Characterized By Maximum Resistance To Environmental Factors And High-Class Abrasion Resistance.* Poles, Ladders And Handrails: Made Of Aisi304 Stainless Steel, Pipe With A Minimum Diameter Of 33.7 X 2.0 Mm, Uv-Resistant, Qualicoat Certified Or By Means Of Dedicated Connectors Made Of Strong Aluminum Alloys, Protected Against Corrosion By Cataphoresis And Powder Coating. With Screws.* Drawbridge - Constituting The Entrance To The Set. The Sides Of The Bridge Are Made Of 15 Mm Thick Hdpe Polyethylene Board, And The Bridge Platform Is Made Of An 18 Mm Thick Anthracite-Colored Anti-Slip Hpl Hexa Plate. Climbing Stones For Easy Climbing Are Made Of A Mixture Of Aggregates And Colored Polyester Resins. Bead Blasting.* Slides: Open, Modular, Polyethylene, Rotomoulded, Made Of Ldpe Material.* Climbing Rock: Made Of Anti-Slip Hpl Board, 13 Mm Thick.* Nets: Made Of Pp-Multisplit Polypropylene Rope, 16 Mm In Diameter, With A Steel Core.* Scanimation Module: Made Of 3 Mm Thick Polycarbonate, Printed Appropriately To Obtain The Effect Of Movement, And Made Of 12 Mm Thick Hdpe Polyethylene. The Mechanism Is Placed In A Rotomolded Or Steel Frame On A 15 Mm Thick Hdpe Polyethylene Plate, Resistant To Uv And External Atmospheric Conditions.* Mirror: Convex, Causing Distortion Of The Silhouette By Expanding And Rounding