Bids Are Invited For Acquisition Of Network Equipment (Switch And Wireless Access Points) For Data Connectivity Infrastructure At The Curitiba Headquarters.

Wireless Network Standard The Equipment Must Be Compatible With The Wifi 7 Standard (Ieee 802.11Be). Radio Architecture The Access Point Must Have At Least 6 (Six) Spatial Streams Combined Between The Supported Bands. Allowing Communication In An Environment With Less Interference And Greater Transmission Capacity. Client Capacity The Equipment Must Support The Simultaneous Connection Of At Least 300 (Three Hundred) Client Devices. Coverage Area Must Have A Coverage Capacity Of Up To 140 M², Considering A Typical Internal Corporate Environment. Wired Network Interface (Uplink) Must Have A High-Speed Ethernet Port Minimum 2.5 Gigabit (2.5 Gbe) For Connection To The Local Network.Electrical Power The Equipment Must Be Powered By Means Of Power Over Ethernet (Poe), Compatible With The Ieee 802.3At Standard Or Higher.Installation And Assembly The Equipment Must Be Designed For Installation On A Ceiling Or Wall.It Must Come With A Bracket Or Fixing Kit Compatible With The Types Of Installation Predicted. Approximate Dimensions The Equipment Must Have Approximate Dimensions Of Up To 206 Mm In Diameter And Up To 46 Mm In Height, Allowing For Equivalent Technical Variation. Or Higher Than The Established Technical Specifications, As Long As They Are Proven By The Manufacturers Official Documentation., Ethernet Ports The Equipment Must Have 48 (Forty-Eight) Rj-45 Ethernet Ports, With A Minimum Speed Of 2.5 Gigabit Ethernet (2.5 Gbe). Uplink The Equipment Must Have At Least 4 (Four) Sfp Ports, With A Capacity Of 10 Gigabit Ethernet (10 Gbe) For Uplink Connection Or Interconnection Between Switches. Poeo Switch Capacity Must Provide A Total Po Power Budget Of 720 W, Allowing Simultaneous Power Supply To Multiple Devices Such As Access Points, Ip Phones And Cameras. Switching Capacity The Equipment Must Operate With Layer 3 Switching, Allowing Routing Functionalities Between Vlans. Management The Switch Must Allow Complete Management, Including Creation Of Vlans, Inter-Vlan Routing, Port Monitoring, Traffic Control And Other Typical Functionalities Of Layer 3 Corporate Switches. Power Backup Equipment Must Have Support For Redundant Power Supply Or Direct Current (Dc) Power Backup, Allowing Greater Availability Of The Network Service. Described, Provided They Are Duly Proven By Official Technical Documentation From The Manufacturer.