Bids Are Invited For Acquisition Of Pipes, Parts And Connections For Maintenance And Execution Of Works In The Water Supply System (Saa) Of The Municipality Of São Bentodo Sul-Sc, In Accordance With The Conditions, Quantities And Requirements Established In This Instrument.

Pvc Cap, Weldable, 110. Manufactured From Rigid Pvc 6, 3, By Injection Process, Pn 750 Kpa, End With Bag For Weldable Joint, In Compliance With The Norms Of Abnt Nbr 5648 And Respective Normative References Thereof, 85. Manufactured From Rigid Pvc 6, 75. Manufactured From Rigid Pvc 6, 60. Manufactured From Rigid Pvc 6, 40. Manufactured From Rigid Pvc 6, Reduction Bushing, Pvc, 75Mm 5648 And Nbr 9821 From Abnte And Their Respective Normative References., 60Mm X25mm, 32 Respective Normative References Of The Same., Rigid Pvc Knee, Brown Color, Dn 20 Mm Manufactured By Injection Process With Virgin Raw Material, Smooth Internal Surface. Nominal Pressure Pn 750 Kpa. Intended For Building Cold Water Systems. According To Abnt Nbr 5648 And Respective Normative References., 90° Elbow Type Connection, Made Of Rigid Pvc In Blue, Intended For Changing Direction In Pipes, With Diameter Reduction From 3/4 To 1/2, With Internal Threads (Female) At Both Ends. Suitable For Conveying Cold Water Under Pressure In Building Installations And Hydraulic Networks, And Must Be Compatible With Pvc Pipe Systems And Threaded Connections. The Threads Must Meet The Bsp Standard, Ensuring Efficient Sealing When Used With Thread Sealing Tape Or Equivalent Material. The Part Must Be Monolithic, Free From Seams Or Gluing, Have A Uniform Finish, Without Cracks, Bubbles Or Deformations And Have Adequate Mechanical Resistance To The Operating Pressure Specified By The Manufacturer. Must Meet Applicable Technical Standards, In Particular Abnt Nbr 5648 And Related Standards., Threadable Sleeve, Made Of Rigid Pvc (Pvc-U), By Injection Molding Process, With Bsp Female Thread On Both Ends, Nominal Diameter Of 2 (Dn 50), Intended For The Connection Of Threadable Components In Building Cold Water Systems. It Must Withstand A Minimum Service Pressure Of 0.75 Mpa (Pn 750Kpa). The Threads Must Comply With Abnt Nbr Nm Iso 7-1. The Product Must Comply With The Requirements Of Abnt Nbr 5648., Short Adapter, Made Of Rigid Pvc 6, With One End In A Bag For Weldable Joints (Dn 60 Mm) And The Other With Female Thread 2, For Connecting Pipes And Components In Water Systems. It Must Withstand A Minimum Pressure Of 0.75 Mpa (Pn 750 Kpa), In Accordance With Abnt Nbr 5648 And Thread In Accordance With Abnt Nbr Nm Iso 7-1, And Must Have A Uniform Finish, Free From Defects And With An Indelible Marking On The Body Of The Part., High Density Polyethylene (Hdpe) Tube/Hose Pe 100, Dn 20, Wall Thickness 2.3 Mm, Nominal Pressure Pn 12 (1.2 Mpa), Blue Color, Smooth Internal Surface, Supplied In Rolls. Manufactured From Virgin Pe 100 High Density Polyethylene Resin