Request For Quotation Purchasing A Metal Four-Cell Safe

Metal Four-Cell Safe (All-Welded). Tactical And Technical Requirements: The Height Of The Metal Safe Is 1500 Mm, Width 500 Mm, Depth 400 Mm. The Metal Thickness Of The Front Panel Is At Least 2 Mm, The Thickness Of The Side Walls Is At Least 1.2 Mm. Four-Cell Metal Safe, All-Welded, Eliminating The Possibility Of Removing Its Individual Elements (Doors, Rear Walls, Etc.). Inside Each Cell Of The Metal Safe There Are Two Shelves. A Four-Cell Metal Safe Is Equipped With Four Doors, Which Are Locked With Strong Internal (Mortise) Locks. All Locks Of Metal Safes Must Differ In Their Secrets And Have At Least Two Copies Of Keys. The Metal Safe Is Equipped With A Device For Sealing Doors (Sealing Device With A Flag); The Seal Impression On The Device Must Be Broken When The Door Is Opened. The Bowl And Flag Of The Sealing Device With Flag Are Made Of Brass. The Outer Diameter Of The Bowl Is At Least 29 Mm, The Inner Diameter Of The Bowl Is At Least 27 Mm. The Diameter Of The Hole In The Bowl Is At Least 3.5 Mm. Each Door In The Upper Right Corner Is Equipped With Durable Glass (If Broken, The Glass Should Not Shatter) Glued On Three Sides With Double-Sided Adhesive Tape. The Glass Must Provide Unobstructed Placement On Top Of Paper Measuring At Least 135 Mm Wide And 100 Mm High. Provide A Recess In The Top Center Of The Glass To Remove Inserted Paper.