Production Of A Sliding/Opening Metal Gate, Made Of 30X30 Tube In The Amount And Division With A 20X20 Square Tube, 18Mm Sheet Metal And Anti-Rust Paint. Unit Of Measurement: Square Meter, Production Of Closed Sliding/Opening Metal Gate, Structure/Frame With 20Mm Carbonated Steel Sheet And Netalône 30/50 Or 30/40 Or 50/50 Lm², Pins 1/2 Or 1/8 Or 3/4. 0.50M Iron Latch And Anti-Rust Zarcão Painting. 1 (One) Inch Angles And 3/8 Round Iron Division. Unit Of Measurement: Square Meter, Grid Set With Frame Made Of 3/8 Mechanical Iron, For Use In Drains And Water Collection Channels, Made In Various Measurements. Unit Of Measurement: Square Meter, Metal Diagonals For Locking Scaffolding, Manufactured In Carbon Steel, With Anticorrosive Finish, Compatible With Tubular Panels Of 1.50 M Galvanized No. 26, 100Mm Diameter. Included: Screws And Other Accessories Used For Fixing. Linear Metro, Supply And Installation Of Rectangular Galvanized Sheet Conductor No. 26, Development 33 Cm. Included: Screws And Other Accessories Used For Fixing. Linear Metro, Supply And Installation Of Iron Handrail With Circular Section Of 4.5 Cm In Diameter, With Iron Oxide Undercoat And Finished With Paint Of Varied Colors, Leaded/Screwed To The Wall Or The Distance From The Wall To The Handrail (Internal Face) There Must Be A Free Space Of At Least 4 Cm, Between The Handrail And The Wall. All Ends Must Be Closed (Welded). Unit Of Measurement: Linear Meter, Supply And Installation Of Metallic Fender - Shapes, Dimensions, Tolerances And Characteristics Of All Constituent Elements Of The Fender Assembly, Specified In Nbr 6971, Are Sufficient To Provide The Assembly Of The Fender With All Provided Connection Elements, Ensuring The Formation Of The Assembly, With Maximum Kinetic Energy Absorption Capacity, Without Check For Breakages Or Fragment Projections. Unit Of Measurement: Square Meter, Supply And Installation Of Metal Protection Grids With Metalon 20/30 Mounting, On Plate 1, 20 And Zarcão Antirust Paint, Metalon Division. Unit Of Measurement: Square Meter, Supply And Installation Of Metal Protection Grids, With 1 Inch By 1/8 Angle, 3/8 Round Iron Division And Zarcão Antirust Paint (Supply And Installation By The Contractor). Unit Of Measurement: Square Meter, Supply And Installation Of Masts For Hoisting Flags, Fixed To At Least 4 Tubes, Made Of Galvanized Steel, With Reel And Other Accessories, Flanged On The Base For Fixing With Four Screws. 3 Units Measuring 6M In Height., Supply And Installation Of Pantograph Door, 3/4 1/8 Thick, Which Will Be Fixed With Rivets. For Assembling The Chess: 3/16 Pacifier Rivet, 1X3/16 Semi-Tubular Pin, 1/2 X 3/8 Knurled Bushings And Washers. For Door Closing, 5/16 Pin Recessed At Both Ends To 3/16, Through Bushings, For Door Guide In The Part. Unit Of Measurement: Square Meter, Supply And Installation Of 30Cm Cut Rufo, Confeccion
