Bids Are Invited For Acquisition Of Backhoe And Bucket Truck

Backhoe Loader - Backhoe Loader, New, Zero Hour, Year/Model 2026, 4-Cylinder Turbo Diesel Engine, Minimum Power Of 92 Hp, Produced By The Same Equipment Manufacturer Group That Meets, At Minimum, Mar-I Emissions Standards, Or International Equivalent, As Epa Tier 3, With Minimum Displacement Of 3.9 L, 4X4 Traction, With No. Minimum 4 Forward And 2 Reverse Gears, Power Shift Or Power Shuttle Transmission, Closed Cabin, Factory Original, Rops/Fops System, Hot/Cold Air Conditioning, With Fm Radio. New Wheels And Tires, Front With Minimum Dimensions Of 12.5X80, Minimum 10 Plies And Rear Tires With Minimum Dimensions Of 19.5X24, Minimum 12 Plies. Front Bucket With Teeth (Loader) With Minimum Capacity Of 0.88M, Backhoe Bucket With Teeth And With Minimum Capacity Of 0.23M, Activation Of The Backhoe System By Joystick, Operating Weight Of Minimum 7,200Kg, Fuel Tank, Non-Metallic, Minimum Capacity 150 Liters, Excavation Depth Of No Minimum 4, 20 Meters. Equipped With All Other Mandatory And Safety Equipment. Equipment Must Comply With Other Brazilian Standards Not Mentioned, But Which Apply To It. According To Other Specifications Attached To The Notice., New Motor Vehicle Type Truck 4X2 Version - New Motor Vehicle Type Truck, With The Following Minimum Characteristics: Model Year 2025/2026 Or Higher, In 4X2 Version, Advanced Cab, With Oil-Powered Engine Diesel, With At Least 04 Vertical Cylinders In Line, Turbocooler, With Power Of At Least 185 Hp, With Electronic Fuel Management, Air Conditioning, With Gearbox With At Least 06 Synchronized Gears Forward And 1 Reverse, With Single-Disc Clutch With A Diameter Of At Least 395 Mm, Hydraulic Steering, Tires Of At Least 275/80 R 22.5 Radials Without Tube, With Total Gross Technical Weight (Pbt) Or Total Technical Capacity Of At Least 16,000 Kg, Total Gross Combined Weight (Pbtc/Cmt) Of At Least 27,000 Kg, Wheelbase Suitable For Installation Of Tipper Bucket, With Two-Circuit Compressed Air Brake With Drum And Abs (According To Inmetro Standard), With Fuel Tank Of At Least 200 Liters, Steel Bumper, Equipped With Tachograph, With Warranty Of At Least 12 Months With No Mileage Limit, Equipped With Tipping Bucket With Capacity Of At Least 8 M, With A Front Hydraulic Cylinder, Hydraulic Pump, Power Take-Off, Chassis Double Bed In Steel Sheet, Floor In Steel Sheet Of At Least 6.35Mm, Side Ladder, Water Barrel, Tool Box, Rubber Mud Cover, Bucket Painting With Epoxy Base And Pu Paint, Reflective Strips On The Sides And Rear Bumper And Other Items In Accordance With Current Legislation. (Standard Dump Bucket). According To Other Specifications Attached To The Notice.