Bids Are Invited For System For Recording Prices For Future Acquisition Of Hydraulic Motor Pump Sets, Intended For Replacing Obsolete Equipment And Formation Of Technical Reserve For Water Supply Systems At Saae De Carmo Deminas/Mg.

Centrifugal Type Multistage Motor Pump Set 1.5 Hp Single Phase 220V. Submersible Motor Pump Set. Type: Submerged Multistage Centrifuge. Diameter: 3. Number Of Stages: 22. Motor: Single-Phase Submerged. Power: 1.5 Hp. Power Supply: 220V. Frequency: 60 Hz. System: 2 Wires. Capacitor: Internal. Thermal Protection: Built-In. Degree Of Protection: Ip68. Application: Residential Wells, Small Supply Systems. Body: Stainless Steel And/Or Brass. Rotor: Technopolymer. Shaft: Stainless Steel. Operation: Submerged With Cooling By Pumped Fluid: Maximum Submergence: Up To 80 M. Installation: Vertical In Well. Standards: Iso 9906, Ansi/Hi 11.6, Ansi/Hi 14.6, Nbr 5410, Nbr 17094 And Other Applicable Standards. Minimum Warranty 12 Months. 220V. Submerged Motor Pump Set. Type: Submerged Multistage Centrifugal Diameter: 4”. Number Of Stages: 16. Engine Reference: M4p2. Power: 2.5 Hp. Power: Three-Phase 220V. Frequency: 60 Hz. Degree Of Protection: Ip68. Application: Public Supply Systems, Artesian Wells, Boosting And Irrigation. Body: Stainless Steel And/Or Cast Iron. Rotor: Technopolymer And/Or Stainless Steel. Shaft: Stainless Steel. Operation: Submerged With Water Flow Cooling. Fluid: Clean Water. Maximum Temperature: 35°C. Ph: 6.5. Sand Content: Up To 40 G/M³. Installation: Vertical In Tubular Well. Technical Requirements: Complete Set (Pump + Motor), New, Original From The Factory, Suitable For Continuous Operation. Standards: Iso 9906Ansi/Hi 11.6, Nbr 17094. Minimum Warranty 12 Months. Reference Model Ebara 4Bpl3-16 Or Technical Equivalent., Centrifugal Type Multistage Motor Pump Set 7, 5 Hp Three-Phase 220V. Submersible Motor Pump Set. Type: Submerged Multistage Centrifuge. Diameter: 4. Number Of Stages: 34. Motor Reference: Submerged Om4a. Power: 7, High Head Pressure, Adduction. Body: Stainless Steel. Rotor: Technopolymer And/Or Stainless Steel. Shaft: Stainless Steel. Operation: Submerged With Water Flow Cooling. Fluid: Clean Water. Maximum Temperature: 35°C. Ph: 6.5. Sand Content: Up To 40 G/M³. Installation: Vertical In Tubular Well. Technician., Centrifugal Type Multistage Motor Pump Set 30 Hp Three-Phase. Centrifugal Type Multistage Motor Pump Set: 4. Phase: Three Phase: 2 1/2. Pressure. Maximum No Flow (M.C.A.): 163.Maximum Suction Height (M C.A.): 8.Ø Impeller (Mm): 147.Weight: 225Kg. Aisi-304, Buna N, Graphite And Ceramic. Closed Rotor, Input Side, Division And Output Body Of Cast Iron. Electric Motor Ip-55, 2 Poles, 60 Hz. Flanged Nozzles According To Din 1092 Standard 1. The Material Of The Body And The Rotor Must Be Made Of Cast Iron. Centrifugal Type Multistage Motor Pump 40 Hp Three-Phase. Centrifugal Type Multistage Motor Pump Set 40 Hp Three-Phase Power (Hp): 40. Stages: 6. Reference Motor: W22 Ir3 Premium 1800 Rpm.