Bids Are Invited For Hiring A Specialized Company To Provide Graphic And Visual Communication Services, With Aim To Standardizing The Visual Identity Of The Municipal Health Department, In Accordance With Manuals And Standards Of The Ministry Of Health And Sus In Act In 2025, According To Quantities And Requirements Established In The Notice And Its Annexes.

Plate Made Of #20 Galvanized Steel Sheet With Anti-Corrosion Treatment And Automotive Or Pu Paint. Information On D300 Sticker Or Special Painting. Posts Fixed By Clamps., High Resolution Digital Printing On Matte Milky 3M Adhesive With Protection/Lamination Against Weather Actions (Rain, Sun, Wind...) And Use Of Cleaning Material. Application Of The Adhesive On Galvanized Steel Plate And Metalon Iron Structure, Engraving With Photocorrosion Process On Brushed Stainless Steel In The Horizontal Direction, And Painting The Set Of Letters, Logos And Lines In Black. Paste Directly On The Wall With 3M Vhb Double-Sided Tape, High Resolution Printing On 3M Milky Vinyl Adhesive (Not Transparent Adhesive) Applied On The Back Of The Acrylic Plate With Special Cutout On 6Mm Acrylic Router — Sticker And Plate With Rounded Corners. Apply Safety Film To The Front Of The Plate. High-Resolution Digital Printing On Matte 3M Adhesive And Applied To A 3Mm Pvc Plate With A Special Cutout And A Fold (This Fold Is Within A Width Of 6Cm), With Lamination/Protection Against The Use Of Cleaning Material. These Plates Are Double-Sided. High Resolution Digital Printing On Matte 3M Adhesive And Applied To A 2Mm Pvc Board, With Lamination/Protection Against The Use Of Cleaning Material. Application Of The Sticker On Galvanized Steel Plate And Metalon Iron Structure., Automotive Adhesive Vinyl - Sticker Plotting Plates According To The Brand Application Manual Of The Ministry Of Health / Brasil Sorridente, Page 12., Adhesive Stripe 25 Cm High By The Width Proportional To The Length Of The Side Of The Vehicle Application Of The Government Brand In The Minimum Proportion Of 61, 5 The Sticker With The Logos Must Be Applied To The Outside Of The Door And The Sandblasted Sticker Without Logos Must Be Applied To The Inside Of The Door