Bids Are Invited For Hiring A Company Specialized In Supplying Industrial Drinking Fountains (Permanent Material), In Order To Meet The Demands Of The Municipal Department Of Education.

37182 Industrial Stainless Steel Column Drinking Fountain, With Total Capacity Of 50 Liters: With 2 (Two) Taps; External Cabinet In Brushed Or Polished Stainless Steel, Aisi 430 Or Higher Quality, With Robust, Corrosion-Resistant Structure, Finish Without Burrs Or Sharp Edges, Base Resting Directly On The Floor, With Leveling Feet That Allow Correct Installation On Irregular Surfaces; Stainless Steel Column/Pedestal Suitable For Use Directly On The Floor, Dispensing With Additional Supports Or Benches; Internal Reservoir With A Minimum Capacity Of 50 Liter Of Effectively Refrigerated Water, Made Of Aisi 304 Stainless Steel Or Non-Toxic Material Approved For Contact With Potable Water, Free Of Odor And Taste, With An Internal Coil In Aisi 304 Stainless Steel Or Equivalent, The Use Of Copper Pipes In Direct Contact With Water Is Prohibited; Refrigeration System By Hermetic Compressor, Minimum Power Of 1/5 Hp Or Higher, Equipped With Adjustable Thermostat, Protection Against Electrical Overload And Overheating, Using Ecological Refrigerant Gas R134a, R600a Or Equivalent, With Properly Ventilated Condenser; Minimum Supply Capacity Between 80 And 150 Cups Per Hour (200 Ml), At Ambient Temperatures Of Up To 27 °C; Equipped With 2 (Two) Front Pressure Taps In Chromed Brass Or Stainless Steel, Both Of Which Can Supply Chilled Water Or A Configuration With Chilled And Natural Water, Depending On The Manufacturer; Stainless Steel Sideboard With Collecting Tray And Drain For Connection To Drainage Point Or Collection Container; Thermal Insulation In Expanded Polyurethane Or Equivalent Material; Electrical Supply At 220 V, 60 Hz, Or Bivolt, Plug According To Abnt Nbr 14136, With Grounding; Equipped With An Activated Carbon Filtration System With Colloidal Silver Or Equivalent Technology, Which Is Replaceable And Easily Accessible; New Product, Certified By Inmetro For Drinking Fountains/Purifiers, Accompanied By A Manual In Portuguese, Minimum Warranty Of 12 Months And Indication Of Authorized Technical Assistance In The National Territory, Must Be Delivered Completely, 37183 Industrial Stainless Steel Column Drinking Fountain, With Total Capacity Of 100 Liters: With 3 (Three) Taps; External Cabinet In Brushed Or Polished Stainless Steel, With Reinforced Structure, Resistant To Corrosion And Easy To Clean, Without Sharp Edges In The Contact Region, With Base Resting Directly On The Floor, Leveling Feet And A Finish That Facilitates Frequent Cleaning Of The School Environment; Stainless Steel Column/Pedestal Designed For Free Installation, Without The Need For Additional Support, Guaranteeing Stability And Safety; Internal Reservoir In Aisi 304 Stainless Steel Or Non-Toxic Material Compatible With Contact With Drinking Water, With A Minimum Capacity Of 50 Liter Of Effectively Refrigerated Water, With Internal Coil In Stainless Steel 304 Or Equivalent, Without The Use Of Copper In Direct Contact With Water, Thermal Insulation In Expanded Polyurethane Or Similar; Refrigeration System Using Hermetic Compressor, High Performance Condenser, Ecological Refrigerant Gas R134a, Equipped With Adjustable Thermostat And Protection Against Electrical Overload And Overheating, With Minimum Supply Capacity Between 100 And 150 Cups Per Hour (200 Ml), At Ambient Temperature Of Up To 27 °C; Equipped With 3 (Three) Front Pressure Taps In Chromed Brass Or Stainless Steel, With A Minimum Of 2 (Two) For Chilled Water And 1 (One) For Natural Water, Or All Chilled According To The Manufacturers Configuration; Stainless Steel Sideboard With Collecting Tray And Drain For C