Bids Are Invited For Acquisition Of A Hospital Bed. Fawler - Ses/Am

(Id120100) Hospital Bed, Type: Electric Fawler, With Attached Scale; Steel Tube Structure Covered By A Fairing Made Of High-Resistance Thermoplastic Material, With Antioxidant Treatment And Finished With Epoxy Powder Paint; Removable Headboard And Footboard Made Of Polyethylene Or Compatible Material; Bed In Tubular Structure Articulated In 4 Sections With Metal Sheet Tops; Protective Bumper Made Of Pvc Or Rubber, Enveloping The Entire Extent Of The Headboard And Footboard; Tube Base Measuring At Least 50 X 30 X 1.5 Mm With Recessed Feet Covered In Thermoplastic Material; Castors From 100 To 125Mm In Diameter, With A Brake System On At Least Two Wheels; With The Possibility Of Iv Poles, Hooks For Foley Bags And Drains; Protective Bumper Made Of Pvc Or Rubber, Enveloping The Entire Extent Of The Headboard And Footboard; Base Coated With Protective Cover; Quadruple, Articulated And Independent Side Rails Made Of Polyethylene Or Compatible Material, Fixed To The Bed, With A Retractable System, Allowing Them To Be Above And Below The Bed; 04 Motors Execute The Movements: Fawler, Semi Fowler, Trendelemburg, Reverse Trendelenburg, Sitting, Back, Knee Flexion, Cardiac Chair, Vascular, Bed Elevation And Cpr; Armored Motors And Control Boxes, Resistant To Water, Dust And Other Waste, Activated Via Wired Remote Control, Main Voltage 110/220V 50/60Hz And Secondary Voltage 24V, With 24V 1.2Ah Rechargeable Battery Unit; Digital Control With Membrane Keyboard To Control Movements; Scale Incorporated Into The Bed For Weighing The Patient, Capable Of Weighing In Any Position; Capacity: 200 To 230 Kg; Minimum External Dimensions: 2.20 X 1.10M And Adjustable Height From 0.50 To 0.85M; Internal Dimensions: 1.90 X 0.90M.