Request For Quotation Medical Products-2

Drainage Catheter. Biliary Drainage Catheter 40 Cm Long With A Hydrophilic Coating Of The Distal Part And A Radiopaque Mark, Intended For External And Internal Drainage Of The Bile Ducts. The Tip Of The Catheter Is Made In The Form Of A Pigtail And Is Equipped With A Split Straightener For Ease Of Insertion. The Catheter Is Made Of Biocompatible Medical Grade Polyurethane With The Addition Of Barium Sulfate To Improve X-Ray Imaging. Catheter Sizes: 8F, 10F, 12F, 14F. The Catheter Is Compatible With 0.035 And 0.038 Diameter Guidewires. The Delivery Set Includes: • Catheter; • Rigid Metal Cannula With An Echogenic Tip; • Flexible Plastic Cannula (Trocar Needle); • Device For Repositioning; •Fixing Thread., 2-Channel Sensor For Invasive Pressure. Two-Channel Pressure Measurement Sensors: 1) 4-Way Faucet 2) 1 Piece Infusion System 180 Cm 3) Clever Pressure Measurement Sensor 4) 2 Pieces Pressure Monitoring Line 120 Cm 5) 2 Pieces Pressure Monitoring Line 34 Cm Composition: Two-Channel Disposable Sensor For Invasive Blood Pressure Monitoring. Intravascular Pressure Monitoring With A Flushing System To Flush Both Channels Simultaneously. Sensitivity: 5 Μv/V/Mmhg±1%. Operating Pressure Range: -30 To 300 Mmhg. Hysteresis: ±1Mmhg. Zero Drift Over Time: <2Mmhg/8H. Overpressure Protection: 6464Mmhg. Operating Temperature: From +15°C To 40°C. Continuous Operation Time: 168 Hours. Storage Temperature: From -25°C To +70°C. Output Impedance: 270-330 Ohm. The Length Of The Infusion System Is 180 Cm. 4 Pressure Monitoring Lines: 2 Not Less Than 34 Cm And 2 Not Less Than 120 Cm. The Tap And Line On The Sensor Are Integrated. Connection To A “Telephone” Type Bedside Monitor Cable In A Protective Transparent Case For Reliable Fastening And Safe Operation. Packaging: Sealed Bag Made Of Thermoformable Film And Gas-Permeable Paper. A Service Kit For The Pressure Sensor Is Provided By The Supplier. Sterilization Method: Ethylene Oxide., Device For Hemostasis Of The Radial Artery. A Device For Compressing The Puncture Site Is Intended To Achieve Hemostasis After Removal Of The Needle, Introducer Or Catheter From The Vascular Bed. The Device Has: A Pressure Plate With Rotation Direction Indicators On The Front Surface And A Rotator With Pressure Divisions On The Side Of Transparent Polycarbonate To Control The Visualization Of The Puncture Site And A Green Pointing Point On The Wound. Compression Pressure And Compression Time Can Be Adjusted For Each Patient Individually. The Fastening Belt Is Made Of Transparent Pvc, Fixed With Velcro (Male 38X52mm, Female 30X85mm), Hypoallergenic, The Seams On The Strap And Velcro Must Be On The Same Line, The Length Of The Strap Is At Least 22Cm. Inflatable Pad With A Capacity Of 2 Full Charges Of Compressed Air With A Syringe Included With A Volume Of 22 Ml, The Syringe Has A Blue Piston, A Transparent Cylinder With A Gradation Of 5/10/15/20 Ml And A Scale Of Each 1 Ml. The Cylinder Is Equipped With A Locking Mechanism That Holds The Piston In The Closed Position. The Cuff Has A Plastic Transparent Insert Of The Anatomical Shape Of The Wrist In The Body Of The Cuff.