Request For Quotation Medical Products-5

Surgical Mesh, Macroporous, Partially Absorbable, Monofilament For Hernia Repair. The Mesh Consists Of 50% Polyglecaprone-25 Thread (Standard Size 5/0) And 50% Polypropylene Thread (Standard Size 6/0), With A Pore Size Of 3.2 Mm To Ensure Better Ingrowth Of The Mesh Into The Anterior Abdominal Wall And The Formation Of A Flexible Scar Structure. The Mesh Contains Colored Stripes That Facilitate The Orientation Of The Mesh In The Abdominal Cavity In The Direction Of Maximum Elasticity. The Specific Gravity Of The Mesh Before Absorption Of The Absorbable Polyglecaprone Component Is 58 G/M2, The Specific Gravity Of The Non-Absorbable Polypropylene Component Is 34 G/M2. Tensile Strength Is 730-810N. Square Shape. Size 30X30 Cm. The Sterile Inner Liner Is Packaged In An Individual Single Foil Package, Which Does Not Have An Additional Polymer-Paper Bag. This Packaging Allows Access To The Inner Liner In One Movement To Minimize The Time Spent Manipulating The Mesh. The Marking Of A Single Foil Package Contains The Name Of The Mesh, Trademark, Manufacturers Trademark, Manufacturers Name; Matrix Code; Catalog Number, Mesh Size, Information On Expiration Date, Batch (Series) Number, Sterility Instructions Indicating The Sterilization Method, Instructions On Single Use. Each Package Is Equipped With A Special Sticker Designed To Be Affixed To The Patients Medical Record To Track Data About The Implanted Device. The Sticker Contains Information About The Manufacturer, Product Expiration Date And Batch Number. The Marking Of The Inner Liner Contains The Name Of The Mesh, The Manufacturers Trademark, The Name Of The Manufacturer, Matrix Code, Catalog Number, Mesh Size, An Indication Of Sterility Indicating The Sterilization Method, An Indication Of Single Use., Cardiac Diagnostic Catheter. The Hydrophilic Angiography Catheter Consists Of A Shaft, A Tip, A Strain Relief Device And A Hub. The Shaft Has A Three-Layer Design With Polymer As The Inner And Outer Layer And A Wire Braided Middle Layer, Which Provide Excellent Bending Resistance And Torque Control. The Tip Is Made Of Polyurethane. The Hub Is Made Of Nylon. The Strain Relief Device Is Made Of Polyolefin. The Catheter Surface Has A Hydrophilic Coating, Which Can Reduce The Coefficient Of Friction After Flushing With Saline Heparin Solution. Hydrophilic Angiography Catheter Has Models 4F, 5F, 6F And Length 65Cm, 70Cm, 80Cm, 100Cm, 110Cm, 120Cm, 125Cm, 130Cm And Can Be Divided Into Straight, Vtk, Vertebral, Rlg, Rs, Im, Rh, Renal, Series, Shepherd Hook I, Shepherd Hook Ii, Jl Series, Jr Series, Pig Series, Al Series, Ar Series, Mp Series, Tig, 3Drc, Cobra Series, Sim Series And Headhunter Series, A Total Of 47 Types According To The Distal Curvature Of The Catheter Shape. The Catheters Distal Curve Shapes Are Designed According To The Anatomy Of The Blood Vessels To Guide It To The Appropriate Position. All Models Of This Device Are Identical In Design, Material Of Manufacture And Manufacturing Process, With The Exception Of Dimensions, Namely Internal Diameter, External Diameter, Length And Curve Shape., Diagnostic Hydrophilic Conductors. The Hydrophilic Conductor Is Made Of Built-In Nitinol Core, Polyurethane Shell With Hydrophilic Coating On The Surface. The One-Piece Design Provides Excellent Maneuverability. Nitinol Core Wire Provides Super Elasticity, Superior Kink Resistance, And Excellent Torque Control Allows The Hydrophilic Conductor To Reach Its Destination Easily And Successfully. The Tungsten-Containing Polyurethane Sheath Can Provide Excellent Visibility Under X-Rays, Which Also Simplifies Guidewire Installation And Management. The Frictionless Coating Has A Very Low Potential For Clot Formation On The Surface Of The Guide Wire. In Addition, The Hydrophilic Polymer Coating Can Greatly Reduce The Friction In The Blood And Provide Great Convenience For Guiding The Guide Wire Itself And Other Devices Forward Into The The Hydrophilic Conductor Has Diameters Of 0.018 Inch, 0.025 Inch, 0.032 Inch, 0.035 Inch And 0.038 Inch, And The Length Of The Device Is 45 Cm, 80 Cm, 120 Cm, 150 Cm, 180 Cm, 220 Cm, 260 Cm, 300 Cm, 400 Cm And 450 Cm. The Device Can Also Be Classified As Standard, Hard And Extra Hard Depending On The Softness Of The Shaft. Depending On The Shape Of The Distal End, The Hydrophilic Conductor Has Bends “Angle”, “R1.5 Mm. J, R2mm J, R3mm J, R4mm J, R6mm J, Straight, B Angle And C Angle.