Request For Quotation Purchase Of Furniture For The Competence Center For Precision Agriculture And Digital Technologies. Delivery And Unloading To The Customers Warehouse Is Carried Out At The Expense Of The Supplier.

Rack. Material: Cold-Rolled Steel With Powder-Polymer Coating (Resistant To Corrosion And Scratches) Or Galvanized Steel. Design: Collapsible, On Hooks Or Bolted Connections, With The Ability To Adjust The Height Of The Shelves (Standard Step - 25–50 Mm). Load Capacity: Distributed Load Per Shelf (From 80 To 500+ Kg Depending On Type) And Total Load Per Section (Up To 2000–4000 Kg). Elements: Vertical Posts With Perforation, Shelves With Stiffening Ribs, Thrust Bearings (Plastic Or Steel For Fastening To The Floor) And, If Necessary, Stiffening Crosses. Safety: Compliance With Gost (For Example, R 55525-2017), Absence Of Sharp Edges, Presence Of Protective Grounding (For Warehouse Systems) And Resistance To Tipping. Special Conditions: Delivery And Unloading To The Customer’S Warehouse Is Carried Out At The Expense Of The Supplier. The Supplier Provides The Customers Representative With Documents For The Goods, In Accordance With Clause 5.1 Of The Agreement On Public Procurement Of Goods., Set (Table + 1 (One) Chair) Student, Single. Table Frame: Material: Steel Profile Pipe No Less Than 20*20 Mm (Square Or Round Section, Wall Thickness No Less Than 1.2–1.5 Mm). Coating: Powder-Polymer Paint, Resistant To Impacts, Chips And Disinfectants. Support: Plastic Caps Should Be Installed At The Ends Of The Pipes To Protect The Floor Covering. Table Top: Material: Laminated Chipboard (Laminated Chipboard) Emission Class E1 (Safe For Children). Thickness: 16–18 Mm. Edge: Pvc 2.0 Mm Thick On The Front Parts And 0.5 Mm On Invisible Joints. Colour: Dark Grey. Chair Frame: Material: Steel Profile Pipe No Less Than 20*20 Mm (Square Or Round Section, Wall Thickness No Less Than 1.2–1.5 Mm). Coating: Powder-Polymer Paint, Resistant To Impacts, Chips And Disinfectants. Support: Plastic Caps Should Be Installed At The Ends Of The Pipes To Protect The Floor Covering. Table Height From 760 Mm. Seat And Back: Material: Bent-Glued Birch Plywood (Multilayer). Thickness: 8–10 Mm. Finish: Colorless Water-Based Varnish (Resistant To Abrasion And Wet Cleaning. Ergonomic Requirements: Corners: All Corners Of Plywood Elements Must Be Rounded (Radius 10–25 Mm). Fastening: The Back And Seat Are Attached To The Frame Using Blind Rivets Or Furniture Bolts With A Semicircular Head. The Fastener Should Not Catch Clothing. Tilt Angle: The Seat Should Have A Slight Tilt Back (2–4°), And The Backrest Should Tilt Back Relative To The Vertical (10–12°). Safety Requirements: Stability: The Chair Should Not Tip Over When The Backrest Is Tilted Back. Weight: The Structure Should Be Light Enough For The Student To Move Independently, But Withstand A Load Of Up To 100–120 Kg. Seat Height From 460 Mm. Special Conditions: Delivery And Unloading To The Customer’S Warehouse Is Carried Out At The Expense Of The Supplier. The Supplier Provides The Customers Representative With Documents For The Goods In Accordance With Clause 5.1 Of The Agreement., Filing Cabinet. Dimensions: 100X40x200 Cm. Type Of Installation: Floor-Standing, Number Of Doors 2 Pieces, Number Of Shelves 5 Pieces. Material Laminated Chipboard. Color: White, Brown; Plain. Construction Type: Vertical Cabinet, Closed Type. Facades (Doors): Hinged Doors With Metal Hinges. The Presence Of Furniture Handles (Plastic Or Metal). Protective Coating. Pvc Edge On All Visible Ends Of The Panels With A Thickness Of At Least 0.5–2.0 Mm To Protect Against Mechanical Damage And Moisture. Special Conditions: Delivery And Unloading To The Customer’S Warehouse Is Carried Out At The Expense Of The Supplier. The Supplier Provides The Customers Representative With Documents For The Goods, In Accordance With Clause 5.1 Of The Agreement On Public Procurement Of Goods., Metal Cabinet. Dimensions: Height - 1860 Mm, Width - 400 Mm, Depth - 500 Mm. Polymer Powder Coating (Color Light Gray Ral 7035). Number Of Cells – 4 (Four). Each Cell Is Equipped With An Individual Mortise Lock. Collapsible Design (Convenient For Transportation). Material: High-Quality Sheet Steel With A Thickness Of At Least 0.7–0.8 Mm. Construction Type: Vertical Cabinet, Closed Type. The Product Is Free Of Dents, Scratches And Signs Of Corrosion. Special Conditions: Delivery And Unloading To The Customer’S Warehouse Is Carried Out At The Expense Of The Supplier. The Supplier Provides The Customers Representative With Documents For The Goods, In Accordance With Clause 5.1 Of The Agreement On Public Procurement Of Goods., Office Chair, Metal Frame, Fabric Upholstery, Soft. Upholstery Material Mesh. Color: Black. Maximum Load Up To 120 Kg. Filling Material Airfoam. Width 47 Cm. Height 85 Cm. Seat Width 47 Cm. Glossy Finish Of The Body. Design Style: Minimalism. Backrest Fixation: In Working Position. Special Conditions: Delivery And Unloading To The Customer’S Warehouse Is Carried Out At The Expense Of The Supplier. The Supplier Provides The Customers Representative With Documents For The Goods, In Accordance With Clause 5.1 Of The Agreement On Public Procurement Of Goods., Office Computer Desk. The Table Is Straight, Office Type, With A Reinforced Frame. Overall Dimensions: Width Not Less Than 140 Cm; Depth Not Less Than 65 Cm; Height Not Less Than 75 Cm. Body Material Laminated Chipboard (Laminated Chipboard) Of High Quality, Emission Class E1. The Thickness Of The Tabletop Is At Least 16 Mm (Recommended 22-25 Mm For Increased Strength). Edge - The Ends Of The Tabletop Must Be Lined With A Wear-Resistant Pvc Edge With A Thickness Of At Least 2 Mm. Cable Management - The Presence In The Tabletop Of A Technological Hole (Cable Channel) With A Decorative Plug For The Output Of Wires. The Table Should Be Equipped With Adjustable Footrests To Compensate For Uneven Floors. Laconic Modern Design. No Sharp Corners On The Front Parts. Furniture Must Be Supplied Unassembled In Secure Packaging With An Attached Assembly Diagram And Fittings. Special Conditions: Delivery And Unloading To The Customer’S Warehouse Is Carried Out At The Expense Of The Supplier. The Supplier Provides The Customers Representative With Documents For The Goods, In Accordance With Clause 5.1 Of The Agreement On Public Procurement Of Goods.