Request For Quotation Purchase Of Materials (Pos)

Steel Sheet, Hot Rolled, Grade St 45, Thickness - Not Less Than 6 Mm, Dimensions Not Less Than 1500X6000 Mm, Weight Of One Sheet - Not Less Than 47.1 Kg. Gost 19903-2015. (Vos), Description Of The Required Functional, Technical, Quality, Operational And Other Characteristics Of The Purchased Product Paronit Pon-B, For The Manufacture Of Gaskets, Sheet, Material - A Mixture Of Asbestos And Rubber, Thickness - Not Less Than 4 Mm, Dimensions Not Less Than 1.5X1.70 (20 Kg). Memst 481-80 (Vos), Gearboxinnoredirwd090-10 0-80B14, Single-Stage, Electric Drive, Worm Gear. The Inner Diameter Of The Gear Bushing For The Shaft With Blades Is 42Mm. Number Of Revolutions Of The Impeller - 140 Rpm Electric Motor Power 4 Kw, Number Of Revolutions Of The Electric Motor: 1500 Rpm. The Number Of Holes On The Plate For Fastening The Gearbox To The Frame Is 4 Pcs., The Diameter Of The Hole Is 14 Mm, The Distance Between The Holes Is 150 Mm, Diagonally - 215 Mm. Gost R50968-96 (Vos), Steel Pipe, Diameter - At Least 32 Mm, Wall Thickness - At Least 3.2 Mm. Gost 8696-74. (Vos), Steel Pipe, Diameter Not Less Than 25 Mm, Wall Thickness Not Less Than 3.2 Mm. Gost 8696-74. (Vos), Power Clamp For Hoses (Reinforced), Diameter 50-65 Mm, Metal, Minimum Compression Diameter - No Less Than 50Mm, Maximum Compression Diameter - No Less Than 65Mm, Tape Width -20Mm, Thickness -1.2Mm, M6 Bolt, Zinc Coating, Clamp Material - Steel Gost 24137-80 (Vos), Gearbox Innored Irwd110-10-1-00B5, Single-Stage, Electric Drive, Worm Gear, With Variator. The Inner Diameter Of The Gear Hub For The Shaft With Blades Is Not Less Than 50 Mm, The Number Of Revolutions Of The Impeller Is: Nmin – 0.6 Rpm, Nmax – 3.3 Rpm Electric Motor Power Is Not Less Than 0.75 Kw, The Number Of Revolutions Of The Electric Motor Is Not Less Than 1500 Rpm. The Number Of Holes On The Plate For Fastening The Gearbox To The Frame Is At Least 4 Pieces, The Hole Diameter Is No More Than 14 Mm, The Distance Between The Holes Is No Less Than 185 Mm, Diagonally No Less Than 265 Mm. Cvt: N1 - At Least 1500 Rpm, N2 - 3.3-0.6 Rpm Gost R50968-96 (Vos), On A Testile Basis, Waterproof No. 0, 20 Meters Per Roll Gost 13344-79 (Vos), Knitting, Made Of Low-Carbon Steel, General Purpose, Diameter Of At Least 1.8-2.5 Mm. Gost 3282-74 (Vos), Sleeve For Flange, Cast, Extended, Dn 315 Mm, Sdr11, Pe100, Ru16 (1.6 Mpa) - Material Polyethylene Pe100, Cast Type, Extended Type, Outer Diameter 315 Mm, Sdr 11, Wall Thickness 28.6 Mm, Nominal Pressure: Gas - 10 Atm, Water - 16 Atm, Nominal Diameter (Dn) 315 Mm. It Is Used For Installation Of Polyethylene Pipelines In Places Where Hdpe Pipes Are Flanged With A Steel Pipe Or With Shut-Off And Control Valves. The Cast Adapter Pe100 Ensures A Reliable Connection, Resistance To Pressure, Corrosion And Chemical Influences, And Durability. Gost 18599-2001. The Product Must Be In Excellent, New Condition Without Any Defects, As Well As Without Defects In Packaging. The Product Must Include A Warranty With A Passport From The Manufacturer, Quality Certificates, And Certificates Of Conformity. The Product Must Comply With The Technical Characteristics Specified In The Customer’S Technical Specification (5F.S), Steel Pipe, Diameter No Less Than 40 Mm, Wall Thickness No Less Than 2.8 Mm. Gost 8696-74. (Vos), On A Testile Basis, Waterproof No. 3, 20 Meters Per Roll Gost 13344-79 (Vos), The Outlet Is Made Of Polyethylene, Diameter Is Not Less Than 32 Mm. Gost 18599-2001. (Vos), Steel Pipe, Diameter - At Least 20 Mm, Wall Thickness - At Least 3 Mm. Gost 8696-74. (Vos),  Worm Clamp, Diameter 22-45 Mm, Metal, Minimum Crimping Diameter - Not Less Than 22Mm, Maximum Crimping Diameter - Not Less Than 45Mm, Tape Width -12Mm, Thickness -1.0Mm, Coating - Zinc, Clamp Material - Steel Gost 24137-80 (Vos), For Pipelines, Polyethylene, Connecting, Diameter - At Least 32Mm, For Soldering Pipes. Gost 18599-2001. (Vos), Polyethylene, Equal Bore, Diameter - At Least 32Mm. Gost 18599-2001. (Vos), Steel Pipe, Diameter Not Less Than 325 Mm, Wall Thickness Not Less Than 7 Mm. Gost 8696-74. (Vos), For Pipelines, Polyethylene, Connecting, Diameter - At Least 32Mm, For Soldering Pipes. Gost 18599-2001. (Vos), The Bend Is Polyethylene, Compression, Diameter – At Least 32 Mm. Gost 18599-2001. (Vos)