Request For Quotation Purchase Of Production Equipment, Simulator And Unmanned Systems For The Competence Center For Precision Agriculture And Digital Technologies. Delivery And Unloading To The Customers Warehouse Is Carried Out At The Expense Of The Supplier.

Parallel Guidance System For Agricultural Machinery (Gnss Guidance System). The System Is Designed To Improve The Accuracy Of Movement Of Agricultural Machinery (Tractors, Sprayers, Seeders And Others) When Performing Field Work. Provides Automated Or Semi-Automatic Control Of The Direction Of Movement Along Specified Trajectories Using Satellite Navigation Signals. System Composition: Gnss Navigation Controller, Operator Panel / Control Tablet, Electric Steering Drive. Interoperability And Compatibility With The Tersus Geobee30 Rtk Station. High-Precision Correction Signal Tap 2.5 Cm For 12 Months, Remote Control Buttons For The Parallel Driving System. Availability Of Certificates Of Conformity, Presence Of A Distributor Certificate. Technical Characteristics: Gnss Controller: Support For Satellite Systems: Gps, Glonass, Beidou (Bds-2/Bds-3), Galileo, Qzss, Sbas. Support For Rtk And L-Band Corrections. Rtk Positioning Accuracy: O Horizontally: Up To 8 Mm + 1 Ppm; Vertical: Up To 15 Mm + 1 Ppm; Parallel Driving Accuracy (Tap): Up To 2.5 Cm. Data Update Rate: Up To 20 Hz. Communication Interfaces: Rs-232, Wi-Fi, Bluetooth, Lte. Power Supply: 12 V Dc. Housing Protection Degree: Ip67. Operating Temperature Range: –40 °C To +70 °C. Compatible With Ag993 Tc120 Control Tablet. Compatible With Ag993 Tes30 Electric Steering Control Tablet. Control Tablet: Operating System: Android 11; Screen: 10.1 Inches, Touch. Resolution: 1280 × 800. Communications: Wi-Fi, Bluetooth, Lte. Interfaces: Usb, Rs-232, Rs-485, Can, Ethernet. Power Supply: 9–36 V Dc. Degree Of Protection: Ip67. Operating Temperature: –20 °C To +70 °C. Compatible With Ag993 Tes30 Electric Steering. Compatible With Ag993 Gc30 Gnss Controller. Electric Steering: Purpose: Automatic Steering Wheel Control. Nominal Torque: 7 Nm. Supply Voltage: 9–28 V Dc. Housing Material: Aluminum Alloy., Operator Simulator For Drones. Number Of Channels: Six Or More. Toggle Switches: One Two-Position Switch, One Potentiometer. Power Supply Via Usb Cable. Compatible With Windows 10. Compatible With Flight Simulators Aerofly, Phoenix 2.5, Realflight G3.5, Realflight G4, Reflex Xtr, Etc. The Delivery Set Includes A Control Panel With A Usb Cable. Special Conditions: Delivery And Unloading To The Customer’S Warehouse Is Carried Out At The Expense Of The Supplier. The Supplier Provides The Customers Representative With Documents For The Goods, In Accordance With Clause 5.1 Of The Agreement On Public Procurement Of Goods., Quadcopter Assembly Kit. Educational Constructor (Assembly Kit) Of An Unmanned Aerial Vehicle With An Aerial Photography Module. Quadcopter Frame: Lightweight Impact-Resistant Frame (Frame Size 210-250 Mm). Material: Carbon Fiber (Carbon) Or Reinforced Plastic. Flight Controller: Programmable Controller (Architecture No Lower Than Stm32 F4/F7). Open Source Firmware Support (Betaflight/Inav). Power Plant: Brushless Electric Motors (At Least 4 Pieces) With Corresponding Speed Controllers (Esc) Of At Least 20A. Survey System: Presence Of A Course Fpv Camera Or Module For Aerial Photography With A Resolution Of At Least 720P. The Presence Of A Vibration-Damping Platform For Mounting The Camera. Control Equipment: Radio Transmitter (Remote Control) With At Least 6 Control Channels, Frequency 2.4 Ghz. Complete Radio Receiver With Support For S.Bus/Ibus Protocols. Battery And Power: Lithium-Polymer (Li-Po) Battery (At Least 3S/4S Configuration, Capacity From 1300 Mah). Charger With Cell Balancing Function. Propellers: A Set Of Propellers (At Least 2 Sets: Main + Spare). Tools And Fasteners: A Full Set Of Hardware, Ties And Necessary Tools For Assembly (Screwdrivers/Wrenches) Included. Teaching Materials: Instructions For Assembling, Setting Up The Flight Controller And Calibrating Sensors In Russian/Kazakh Languages. Kit Type: Diy (Do It Yourself) - The Product Must Be Supplied Disassembled For Self-Assembly And Soldering (If Provided For By The Design). Educational Function: The Ability To Program Flight Modes And Connect Additional Sensors (Gps, Ultrasonic Rangefinder) In The Future. Safety: Availability Of Propeller Protection (If Provided By The Model) And Safety Instructions When Working With Li-Po Batteries. Warranty: At Least 12 Months For Electronic Components (Flight Controller, Motors, Regulators) Provided There Is No Mechanical Damage Due To Falls.