Type: Capacitor; Directivity: Omnidirectional, Cardioid, Figure Eight, Wide Cardioid, Hypercardioid; Transmission Type: Wired; Frequency Range: 20 - 20,000 Hz; Nominal Impedance: 50 Ohms; Connection: 3-Pin Xlr; Sensitivity: 11 Mv/Pa;, The C451 B Is A Small Diaphragm Condenser Microphone. 3-Pin Xlr Male Connector In Metal Housing For Audio Applications Pbt Insulation, Resistant To: - Soldering, - Aging, - Maximum Temperature 200°C. Impact-Resistant Metal Housing Soldering Type: Excellent Mechanical Sealing Allowable Cable Diameter (Mm): Min. Ø 3.5 Mm. - Max. Ø 6.5 Mm -50Pcs., Condenser Studio Microphone. Directivity Cardioid Condenser Studio Microphone With External Polarization. Frequency Range No More Than 20 Hz – No Less Than 20,000 Hz. Sensitivity No More Than 25 Mv/Pa. Dynamic Range Of At Least 140 Db. Equivalent Noise Level No More Than 10 Db (A). The Maximum Sound Pressure Level (At 1 Khz) Is Not Less Than 140 Db. Phantom Power Supply 48 V. Nominal Resistance No More Than 50 Ohms. Minimum Termination Resistance 1000 Ohms. Dimensions 165 X 57 Mm. Weight 485 G. Includes: Holder, Bag., A Professional Multi-Pattern Condenser Microphone For The Studio, Stage, And Anywhere Else You Need High-Quality Sound. Microphone Type Condenser Polar Pattern Cardioid, Supercardioid, Omnidirectional, Figure Eight Frequency Range No More Than 20 Hz – No Less Than 20000 Hz Equivalent Noise Level No More Than 8 Db-A Sensitivity No Less Than 20 Mv/Pa Signal-To-Noise Ratio Less Than 86 Db-A Attenuator -20 Db Low Pass Filter 100 Hz, 12 Db/Octave Electrical Resistance No More Than 200 Ohm Recommended Load Resistance 1000 Ohms Dimensions: Length 43 Mm, Width 55 Mm, Height 160 Mm. Net Weight 300G (Microphone Only) Connector: 3-Pin Xlr Voltage 44–52 V Current 3 Ma Accessories Included: Universal Shock-Absorbing Bracket, Stand Adapter, Wind Protector, Metal Carrying Case, C414 Xlii Multi-Range Condenser Microphone. Balanced Microphone Cable. Pvc Shell. Available In Various Colors. External Cable Diameter Ø 6.00 (±0.20) Mm. Shielding: Oxygen-Free Copper (O.F.C.). Spiral Coating 100%. The Cores Are Twisted In Pairs With Textile Filler Between The Conductors And Wrapped With Non-Woven Polyester Tape. The Core Insulation Is Compact Polyethylene (Pe), One Color Is Orange, The Other Is Transparent. Diameter Ø 1.50 (±0.20) Mm. Oxygen-Free Copper (O.F.C.), Section 8X0.20 Mm. Nominal Cross-Section 2X0.25 Mm². 50 Pieces, Professional Dynamic Microphone For Bass Drum. Dynamic Microphone Capsule. Directional Pattern: Cardioid. Frequency Range No More Than 20 Hz – No Less Than 17000 Hz. Max. Spl At 0.5% Thd > 160 Db (Calculated Value) Electrical Resistance No More Than 210 Ohms. Recommended Load Resistance ≥ 2000 Ohms. Sensitivity No Less Than 1.8 Mv/Pa (-55 Dbv). Temperature Range -10 °C To +60 °C. Dimensions: Length 115, Height 126 Mm, Diameter 70 Mm Net Weight Only Microphone 300 G. Connector: 3-Pin Xlr. Passive Single-Channel Direct Box. Input 1 Instrument/Line/Acoustic Level. Input Connectors 1/4 Jack. Input Type Unbalanced, With Rf Filtering. Input Impedance 150 Kohm Typical Maximum Input +20 Dbu (Attenuator 0 Db); +40 Dbu (Attenuator 20 Db); +60 Dbu (Attenuator 40 Db) Output (Through) 1 Parallel From Input Connector, 1/4 Unbalanced, With Rf Filtering Input Connectors Xlr Male Balanced Output Impedance 150 Kohm Typical Maximum Output 0 Dbc Transformer - Shielded Frequency Response No More Than 20 Hz - No Less Than 20 Khz, +/-2.5 Db. Noise <-105 Db Unweighted, 22 Khz Bandwidth. Thd <0.01%, Bandwidth 20 Hz - 20 Khz; <0.005%, 1 Khz. Dimensions: L X W X H (148 X 138 X 56 Mm). Device Weight: 0.65 Kg. 10 Pcs., Professional Condenser Microphone C430. 3-Pin Female Xlr Connector In Metal Housing For Audio Applications Pbt Insulation, Resistant To: - Soldering, - Aging, - Maximum Temperature 200°C. Impact-Resistant Metal Housing Soldering Type: Excellent Mechanical Sealing Allowable Cable Diameter (Mm): Min. Ø 3.5 Mm. - Max. Ø 6.5 Mm - 50 Pcs.
