Bids Are Invited For Acquisition Of School Furniture Intended For Units Of The Municipal Education Network Of Pomerode, According To Specifications, Quantitatives And Conditions Established In The Bidding Notice And Its Annexes.

Maternal Activity Set With 5 Seats And A Chair For The Monitor. Table: Structure With Feet In 1½ Steel Tube (Wall 1, 50). Sides With 1¼ Tube (Wall 1, 50) With Double Busbar. Top Crossbar In 1¼ Tube (Wall 1, 50) Supporting The Top. Horizontal Platter Made Of 1¼ Steel Tube (Wall 1, 50) To Join The Sides Of The Table. Closing Of The Tops And Shoes With Injected Tips In Orange Color, Fixed Through Fitting And Riveted To The Structure Using 4.8 Welding Must Have A Smooth And Homogeneous Surface And Must Not Have Sharp Points. Painting By Epoxy-Powder System. Top Size 1800 Finishing Of The Edges In A Rounded Pvc Profile With A Radius Of Curvature Of 20 Mm In Beige. American Bushings Are Built Into The Top, Prepared To Receive ¼ Holes Are Machined In The Top To Fit The Shells (Seats) Made Of Plastic Resin In Useful Area Dimensions (Width 280 Mm X Depth 190 Mm X Backrest Height 220 Mm), And On The Front There Is A Protrusion With A Radius Of 40 Mm For Better Accommodation And Comfort. On The Back Of The Backrest, Two Protrusions (Ribs) Are Injected To Ensure Greater Resistance, Accompanied By Upholstered Protection In Eva Material And Equipped With A Seat Belt That Allows Removal For Cleaning. The Support Bases For The Shells Are Made Of ¾ Steel Tube (Wall 1, 06) Where The Shells Will Be Fixed By 4, 8 X 16 Rivets. Available Shell Colors: Orange, Yellow, Red, Pink And Lilac. Swivel Chair For Monitor: Structure Consisting Of Platform And Gas Column, L Base With Castor, With Height Adjustment..., Student Set Size 04, Table And Chair: Table: Structure In Steel Tube, Sides And Book Holder Support Tray In 29X58mm Plate 16 (Wall 1.5Mm), Lower Base (Feet) In 38Mm (Wall 1½) Plate 16 (Wall 1.5Mm). Fixing The Top In A 20X20 Tube (1.50 Mm Wall) To Reinforce Its Upper Part, Which Are Fixed To 2 Side Pieces In A 20X30 Tube (1.50 Mm Wall), Thus Giving Resistance To The Surface Of The Top. Closing With Tips And Shoes In Red Polypropylene, Fixed To The Structure Using Snap Rivets Diameter 4.80Mm, Length 4.8X12mm. Book Holder (503X304mm) In Gray Polypropylene, Fixed To The Longitudinal Structure Using Replacing Rivets. Surface Protection With Special Anticorrosive Treatment And Gray Epoxy Powder Painting. Top (600X450mm) Flat Surface, In Abs Resin, Textured, Gray Color, Without Application Of Melamine Laminate, 4Mm Thick, High Gloss Side Edges (Flaps That Surround The Structure Dimensions Of 45Mm In Height On The Back Side Of The Top With Reduction To 21Mm On The Part In Contact With The User) With A Larger Frieze Resistance, Transverse And Longitudinal Ribs To Reinforce Tensile In The Lower Part Of The Top. Table Height: 640Mm. Chair: Structure In 20, 7Mm Steel Tube, 14 (1, 90Mm) Sheet Metal. Tips And Shoes In Red Polypropylene, Fixed To The Structure Using A Fitting And Expansion Pin. Surface Protection Co