Bids Are Invited For Price Registration For The Acquisition Of Furniture For Basic Health Units, Emergency Rooms And Other Departments, In Compliance With The Municipal Health Department.
Bids Are Invited For Price Registration For The Acquisition Of Furniture For Basic Health Units, Emergency Rooms And Other Departments, In Compliance With The Municipal Health Department.
Steel Wardrobe For Cloakroom, Produced In 26 0.45Mm Sheet Steel, Has 8 Doors With Ventilation Louvers, Independent Medium Size Compartment Without Internal Dividers. 027Larg - Ventilation System: Venetian - Closing: Padlock Stud - Painting: Epoxy Powder - Height: 198Cm With Omega Reinforcement Below, Column L3, Plate 14 For Storage Of 120 Kg Per Tray. Steel, Treated By The Anti-Corrosive Phosphating Process, Synthetic Enamel Painting Process. Color: Color Will Be Chosen From The Winning Bidders Color Chart. Minimum 12 Month Warranty, Swivel Upholstered Chair With Armrests: Product Dimensions: Height 101 Cm, Width. 61 Cm, Prof. Approximate 52 Cm; Backrest: Wide. 40 Cm, Height 43 Cm Approximate; Seat: Wide. 50 Cm, Prof. Approximate 47 Cm And Minimum 35Mm Injected Foam; Iron Structure; Height Adjustment With Gas Piston; With Fixed Arms; Minimum Supported Weight Of 110 Kg, Synthetic Leather Covering And Color To Be Defined Later., Fixed Desk Chair Without Armrests, Fixed Upholstered Chair Without Arms. Seat And Back: Made With Multi-Laminated Plywood, At Least 12 Millimeters Thick, Anatomically Molded. It Is Upholstered With Flexible, High-Resistance Injected Foam With A Density Of 45Kg/M³ And Finally Covered With Courvin Fabric. The Front Edge Of The Seat Must Be Curved For Better Blood Circulation, Thus Following Ergonomic Standards. Type S Extruded Pvc Profile Of At Least 17 Mm Must Be Used On The Edges For Total Protection. Junction: Must Be Made Of Steel Sheets Of At Least 3/16, Has An L-Shape With Reinforcing Rib. Structure: It Must Be Made With A Round Tube Of At Least 7/8 Plate 18. Approximate Measurements (Measurements May Vary By 5% More Or Less) Seat: 47 X 42 (Cm). Backrest: 36 X 42 (Cm). Color: Black. Assembly Included, If Necessary, Tall Cabinet With 2 Doors And Key In Mdf - Top: Must Be Made Of Mdf Approximately 25Mm Thick, Coated On Both Sides In Textured Melamine Laminate (Bp). Finishing On The Front, Side And Back Straight Edges Covered With Pvc Protection Tape Approximately 2Mm Thick. Body: Consisting Of Side, Base And Doors. Manufactured In High Density Mdp Approximately 15Mm Thick Coated On Both Sides In Textured Melamine Laminate (Bp). With Finishing Of The Doors And Other Components Of The Cabinet Body In Pvc Tape Approximately 0.5Mm Thick, Glued Using The Hot Melt System. All Edges Must Receive A Perfect Finish, Respecting The Color Tone Of The Melamine Laminate And The Thickness Of The Chipboard. The Bottom Is Made Of Mdf Approximately 15Mm Thick And Covered On Both Sides In Textured Melamine Laminate (Bp). Doors: Equipped With Steel Hinges Allowing Opening Up To 107º, And Ø35mm Cup. Handles Made Of Injected Aluminum With A Brushed Aluminum Finish, Drilling Approximately 128Mm. Front Lock On The Central Part Of The Cabinet. Finished On Straight Edges Covered With Pvc Protection Tape Approximately 0.5Mm Thick. All Edges Receive A Perfect Finish Respecting
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
