Verification Of The Dmk Airborne Meteorological Kit. In Accordance With The Rules For Conducting Verification Of Measuring Instruments And Establishing The Frequency Of Verification Of Measuring Instruments And The Forms Of The Certificate Of Verification Of Measuring Instruments Are Developed In Accordance With Subparagraphs 11) And 20), Article 6-2 Of The Law Of The Republic Of Kazakhstan Dated June 7, 2000 “On Ensuring The Uniformity Of Measurements” (Hereinafter Referred To As The Law) And Determine The Procedure For Verifying Measuring Instruments, Establishing The Frequency Of Verification Of Measuring Instruments And The Form Of The Certificate Of Verification Of Measuring Instruments. Measuring Instruments Used In Measurements For Which Metrological Requirements Are Established In Accordance With The Rules For The Formation Of Lists Of Measurements And Metrological Requirements For Them Related To State Regulation, Approved In Accordance With Subparagraph 18) Of Article 6-2 Of This Law Are Subject To Verification. Measuring Instruments That Are Objects Of State Metrological Control In Accordance With Article 22 Of The Law, After Approval Of Their Type Or Metrological Certification And Registration In The Register Of The State System For Ensuring The Uniformity Of Measurements (Hereinafter Referred To As The Register Of The Gsi Rk), Are Subject To Verification Before Release Into Circulation, After Repair, And During The Period Of Operation. The Establishment Of The Frequency Of Verification Of Measuring Instruments Is Carried Out In Accordance With Chapter 3 Of These Rules. The Value Of The Frequency Of Verification Is Set In Calendar Time For Measuring Instruments, The Change In Metrological Characteristics Of Which Is Due To Aging (Does Not Depend On The Intensity Of Operation Of The Measuring Instrument), And In Operating Hours For Measuring Instruments, The Change In Metrological Characteristics Of Which Is A Consequence Of Wear Of The Elements Of The Measuring Instruments (Depending On The Intensity Of Operation)., Verification Of The Topographic And Geodetic Complex Gps Gs16 Rover. In Accordance With The Rules For Conducting Verification Of Measuring Instruments And Establishing The Frequency Of Verification Of Measuring Instruments And The Forms Of The Certificate Of Verification Of Measuring Instruments Are Developed In Accordance With Subparagraphs 11) And 20), Article 6-2 Of The Law Of The Republic Of Kazakhstan Dated June 7, 2000 “On Ensuring The Uniformity Of Measurements” (Hereinafter Referred To As The Law) And Determine The Procedure For Verifying Measuring Instruments, Establishing The Frequency Of Verification Of Measuring Instruments And The Form Of The Certificate Of Verification Of Measuring Instruments. Measuring Instruments Used In Measurements For Which Metrological Requirements Are Established In Accordance With The Rules For The Formation Of Lists Of Measurements And Metrological Requirements For Them Related To State Regulation, Approved In Accordance With Subparagraph 18) Of Article 6-2 Of This Law Are Subject To Verification. Measuring Instruments That Are Objects Of State Metrological Control In Accordance With Article 22 Of The Law, After Approval Of Their Type Or Metrological Certification And Registration In The Register Of The State System For Ensuring The Uniformity Of Measurements (Hereinafter Referred To As The Register Of The Gsi Rk), Are Subject To Verification Before Release Into Circulation, After Repair, And During The Period Of Operation. The Establishment Of The Frequency Of Verification Of Measuring Instruments Is Carried Out In Accordance With Chapter 3 Of These Rules. The Value Of The Frequency Of Verification Is Set In Calendar Time For Measuring Instruments, The Change In Metrological Characteristics Of Which Is Due To Aging (Does Not Depend On The Intensity Of Operation Of The Measuring Instrument), And In Operating Hours For Measuring Instruments, The Change In Metrological Characteristics Of Which Is A Consequence Of Wear Of The Elements Of The Measuring Instruments (Depending On The Intensity Of Operation)., Verification Of The Leica Ts-16 Technical Geodetic Complex. In Accordance With The Rules For Conducting Verification Of Measuring Instruments And Establishing The Frequency Of Verification Of Measuring Instruments And The Forms Of The Certificate Of Verification Of Measuring Instruments Are Developed In Accordance With Subparagraphs 11) And 20), Article 6-2 Of The Law Of The Republic Of Kazakhstan Dated June 7, 2000 “On Ensuring The Uniformity Of Measurements” (Hereinafter Referred To As The Law) And Determine The Procedure For Verifying Measuring Instruments, Establishing The Frequency Of Verification Of Measuring Instruments And The Form Of The Certificate Of Verification Of Measuring Instruments. Measuring Instruments Used In Measurements For Which Metrological Requirements Are Established In Accordance With The Rules For The Formation Of Lists Of Measurements And Metrological Requirements For Them Related To State Regulation, Approved In Accordance With Subparagraph 18) Of Article 6-2 Of This Law Are Subject To Verification. Measuring Instruments That Are Objects Of State Metrological Control In Accordance With Article 22 Of The Law, After Approval Of Their Type Or Metrological Certification And Registration In The Register Of The State System For Ensuring The Uniformity Of Measurements (Hereinafter Referred To As The Register Of The Gsi Rk), Are Subject To Verification Before Release Into Circulation, After Repair, And During The Period Of Operation. The Establishment Of The Frequency Of Verification Of Measuring Instruments Is Carried Out In Accordance With Chapter 3 Of These Rules. The Value Of The Frequency Of Verification Is Set In Calendar Time For Measuring Instruments, The Change In Metrological Characteristics Of Which Is Due To Aging (Does Not Depend On The Intensity Of Operation Of The Measuring Instrument), And In Operating Hours For Measuring Instruments, The Change In Metrological Characteristics Of Which Is A Consequence Of Wear Of The Elements Of The Measuring Instruments (Depending On The Intensity Of Operation)., Verification Of Gnss Complex Eft. In Accordance With The Rules For Conducting Verification Of Measuring Instruments And Establishing The Frequency Of Verification Of Measuring Instruments And The Forms Of The Certificate Of Verification Of Measuring Instruments Are Developed In Accordance With Subparagraphs 11) And 20), Article 6-2 Of The Law Of The Republic Of Kazakhstan Dated June 7, 2000 “On Ensuring The Uniformity Of Measurements” (Hereinafter Referred To As The Law) And Determine The Procedure For Verifying Measuring Instruments, Establishing The Frequency Of Verification Of Measuring Instruments And The Form Of The Certificate Of Verification Of Measuring Instruments. Measuring Instruments Used In Measurements For Which Metrological Requirements Are Established In Accordance With The Rules For The Formation Of Lists Of Measurements And Metrological Requirements For Them Related To State Regulation, Approved In Accordance With Subparagraph 18) Of Article 6-2 Of This Law Are Subject To Verification. Measuring Instruments That Are Objects Of State Metrological Control In Accordance With Article 22 Of The Law, After Approval Of Their Type Or Metrological Certification And Registration In The Register Of The State System For Ensuring The Uniformity Of Measurements (Hereinafter Referred To As The Register Of The Gsi Rk), Are Subject To Verification Before Release Into Circulation, After Repair, And During The Period Of Operation. The Establishment Of The Frequency Of Verification Of Measuring Instruments Is Carried Out In Accordance With Chapter 3 Of These Rules. The Value Of The Frequency Of Verification Is Set In Calendar Time For Measuring Instruments, The Change In Metrological Characteristics Of Which Is Due To Aging (Does Not Depend On The Intensity Of Operation Of The Measuring Instrument), And In Operating Hours For Measuring Instruments, The Change In Metrological Characteristics Of Which Is A Consequence Of Wear Of The Elements Of The Measuring Instruments (Depending On The Intensity Of Operation)., Verification Of The Topographic And Geodetic Complex Gps Gs16 Base. In Accordance With The Rules For Conducting Verification Of Measuring Instruments And Establishing The Frequency Of Verification Of Measuring Instruments And The Forms Of The Certificate Of Verification Of Measuring Instruments Are Developed In Accordance With Subparagraphs 11) And 20), Article 6-2 Of The Law Of The Republic Of Kazakhstan Dated June 7, 2000 “On Ensuring The Uniformity Of Measurements” (Hereinafter Referred To As The Law) And Determine The Procedure For Verifying Measuring Instruments, Establishing The Frequency Of Verification Of Measuring Instruments And The Form Of The Certificate Of Verification Of Measuring Instruments. Measuring Instruments Used In Measurements For Which Metrological Requirements Are Established In Accordance With The Rules For The Formation Of Lists Of Measurements And Metrological Requirements For Them Related To State Regulation, Approved In Accordance With Subparagraph 18) Of Article 6-2 Of This Law Are Subject To Verification. Measuring Instruments That Are Objects Of State Metrological Control In Accordance With Article 22 Of The Law, After Approval Of Their Type Or Metrological Certification And Registration In The Register Of The State System For Ensuring The Uniformity Of Measurements (Hereinafter Referred To As The Register Of The Gsi Rk), Are Subject To Verification Before Release Into Circulation, After Repair, And During The Period Of Operation. The Establishment Of The Frequency Of Verification Of Measuring Instruments Is Carried Out In Accordance With Chapter 3 Of These Rules. The Value Of The Frequency Of Verification Is Set In Calendar Time For Measuring Instruments, The Change In Metrological Characteristics Of Which Is Due To Aging (Does Not Depend On The Intensity Of Operation Of The Measuring Instrument), And In Operating Hours For Measuring Instruments, The Change In Metrological Characteristics Of Which Is A Consequence Of Wear Of The Elements Of The Measuring Instruments (Depending On The Intensity Of Operation)., M-49M Meteorology Station Son Tekseristen Otkizu In Accordance With The Rules For Conducting Verification Of Measuring Instruments And Establishing The Frequency Of Verification Of Measuring Instruments And The Form Of The Certificate For Verification Of Measuring Instruments Are Developed In Accordance With Subparagraphs 11) And 20), Article 6-2 Of The Law Of The Republic Of Kazakhstan Dated June 7, 2000 “On Ensuring The Uniformity Of Measurements” (Hereinafter Referred To As The Law) And Determine The Procedure For Verifying Measuring Instruments, Establishing The Frequency Of Verification Of Measuring Instruments And The Form Of The Certificate Of Verification Of Measuring Instruments. Measuring Instruments Used In Measurements For Which Metrological Requirements Are Established In Accordance With The Rules For The Formation Of Lists Of Measurements And Metrological Requirements For Them Related To State Regulation, Approved In Accordance With Subparagraph 18) Of Article 6-2 Of This Law Are Subject To Verification. Measuring Instruments That Are Objects Of State Metrological Control In Accordance With Article 22 Of The Law, After Approval Of Their Type Or Metrological Certification And Registration In The Register Of The State System For Ensuring The Uniformity Of Measurements (Hereinafter Referred To As The Register Of The Gsi Rk), Are Subject To Verification Before Release Into Circulation, After Repair, And During The Period Of Operation. The Establishment Of The Frequency Of Verification Of Measuring Instruments Is Carried Out In Accordance With Chapter 3 Of These Rules. The Value Of The Frequency Of Verification Is Set In Calendar Time For Measuring Instruments, The Change In Metrological Characteristics Of Which Is Due To Aging (Does Not Depend On The Intensity Of Operation Of The Measuring Instrument), And In Operating Hours For Measuring Instruments, The Change In Metrological Characteristics Of Which Is A Consequence Of Wear Of The Elements Of The Measuring Instruments (Depending On The Intensity Of Operation).
