Tenders Are Invited For Modernization Of The Sports Field Complex Moje Boisko - Orlik 2012 In Wydminy

The Subject Of The Order Is: Modernization Of The Sports Pitch Complex Moje Dziennik 2012 In Wydminy, Including Replacing The Entire Artificial Grass Surface Of The Existing Pitch With A New One Made Of Artificial Grass, Repairing The Fence, Replacing Ball Catches, Painting The Lines Of The Multi-Purpose Pitch, Replacing Game Goals With Nets And Replacing Basketball Backboards. All Work Is To Be Performed In Accordance With Applicable Norms And Safety Standards. The Order Includes:1. Replacement Of The Entire Artificial Grass Surface Of The Existing Orlik Pitch In Wydminy, With An Area Of ​​Approximately 1,900 M2, With A New Artificial Grass Surface. The Existing Pitch Has An Existing Synthetic Grass Surface With A Substructure And Sports Equipment. The Old Grass Should Be Dismantled And Disposed Of. Characteristics Of The Substrate - The Substrate On Which The Carpet Is To Be Laid Should Be Prepared In Accordance With The Manufacturers Instructions And Should Be Dry, Even, Free Of Contamination, Strong And Stable. Synthetic Grass - Fiber Height Min. 30Mm-35Mm. Existing Pitch Substructure - The Existing Pitch Leveling Layer Should Be Leveled And Compacted. The Existing Pitch Slopes Should Be Maintained. Laser Profiling. Designed Synthetic Grass Surface For A Football Pitch - Required Parameters: 1) Fiber Length Min 30Mm Max 35Mm2) Number Of Tufts Min 17,400/M23) Number Of Fibers Min 380,000/M24) Total Weight Of The Surface Min 4000 G/M25) Fiber Weight Min 2500 G/M26) Tearing Of A Tuft Of Grass Min 65 N 7) Fiber A - Straight, Monofilament, Polyethylene With A Thickness Of At Least 360 Microns, And Fiber B - Textured, Monofilament, Polyethylene With A Fiber Thickness Of At Least 320 Microns8) Total Dtex Min 21.0009) Type Of Grass: 100% Polyethylene10) Method Of Production: Tufting11) Filling: Quartz Sand According To The Test12) Under Grass, A Prefabricated Mat With A Thickness Of At Least 12 Mm Must Be Installed 13) Color - Green, At Least Two Shades In One Bunch. Required Minimum Parameters Of The So-Called Underlay. Shock Pad Mounted Under The Grass: 1) Type: Prefabricated, 2) Thickness: Min. 12 Mm,3) Type: Polyethylene Or Polyolefin In Order To Confirm The Minimum Parameters Of The Surface, The Following Documents Should Be Presented Together With The Offer As Evidence Of Meeting The Requirements: A) Complete Laboratory Test Report For The Artificial Grass System (Surface With Quartz Sand And Mat), Confirming Compliance With The Current En 15330-1:2013/ Pn-En Standard 15330-1:2014-02 And Confirming The Minimum Parameters Of The Offered Synthetic Grass Specified By The Ordering Party. The Test Must Be Performed By An Independent Laboratory, Accredited In Accordance With Iso/Ice 17025:2018 B) Technical Card Of The Offered Surface, Certified By Its Manufacturer, Confirming The Minimum Parameters Required By The Ordering Party For The Surface In The Scope That Was Not Covered By The Test Report In Accordance With The En 15330-1:2013/Pn-En 15330-1:2