Task No. 1. Thermal Modernization Of The Lks Buk Rudy Building In Rudy At 20A Cegielska Street. The Scope Of Work Includes: Construction Industry Works: - Insulating The External Walls Of The Building With Polystyrene, - Insulating The Roof With Sprayed Polyurethane Foam, - Replacing The Garage Door, - Replacing External Window Sills, - Dismantling And Installing Downspouts, - Strengthening The Roof Slope, - Making A New Window Opening In The External Wall Of The Building Along With Window Installation, - Making New Door Openings At The Basement Level, Including Installing Doors To Toilet Rooms, - Painting And Maintenance Roofing. Sanitary Industry Works: - Disassembly Of A Coal-Fired Boiler, - Disassembly Of The Domestic Hot Water Tank With Fittings, - Disassembly Of The Domestic Hot Water Expansion Vessel. Together With The Safety Valve, - Disassembly Of The Main Pipe Distributor, - Disassembly Of Central Heating Installation Pipelines Along With Devices And Fittings In The Sections: From The Boiler To The Domestic Hot Water Tank. And From The Boiler To The Main Distributor, - In The Boiler Room, A Non-Flammable, Single-Leaf Entrance Door With Dimensions 100X200 Cm, Fire Resistance Class E And 30 Should Be Installed, Opening To The Outside Of The Boiler Room, The Door Should Have A Handleless Closure From The Inside Of The Room, Opening From The Boiler Room Under Pressure, - Stoneware Tiles With A Plinth Should Be Placed On The Walls With A Minimum Height On The Existing Floor In The Boiler Room And The Fuel Storage Room. 10 Cm, - Filling The Gaps In Ceilings And Walls, - The Walls And Ceiling In The Boiler Room Should Be Painted With Washable Paints (Double Painting), The Ceiling Should Be Painted With Acrylic Paints (Double Painting), - A Separate Room Should Be Allocated In The Boiler Room For Storing Fuel, By Making A Partition Wall E I 120 Of Solid Masonry Bricks With Full Joints 12 Cm Thick, - Installing Non-Flammable Doors, Single-Leaf, Dimensions 90X200 Cm, Fire Resistance Class E And 60, Opening Outside The Fuel Storage Room, - All Passages Of Existing And Planned Installations Through Fire Separation Partitions (Ceiling Walls) Should Be Made With Fire Resistance Consistent With The Resistance Of The Partition, - Replacement Of The Existing Coal-Fired Boiler With A Pellet (Biomass) Boiler With A Power Of 32 Kw, - Construction Of A New Flue Gas Discharge System, - Hot Water Tanks With One Coil And Possibility For An Electric Heater - With A Capacity Of 1,500 Dm3, With A Capacity Of 500 L, - Existing 3 Heating Circuits (Radiator) - Automatic Air Vents Should Be Installed On The Existing Heating Circuits Under The Ceiling, - Measurements And Tests.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
