Tenders Are Invited For Construction Of Municipal Roads

The Road In Question Currently Has A Surface Partially Paved With Crushed Aggregate, Up To 3 M Wide. The Project Assumes The Construction Of A New Bitumen Roadway With A Width Of 3.5 M And 6 M On The Section Described As 2Gkg According To The Local Spatial Development Plan, Along With Both Sides Of The Roadside Reinforced With Aggregate 0.75 M Wide. The Project Envisages The Execution Of Works On The Section From Km 2+246.00 To Km 2+595.00 On Public Road No. 115419L And From Km 0+000 To Km 0+367.23. The Total Length Of The Designed Roads Is 716.23 Meters. The Planned Public Road Is A Rural Road. Scope Of Investment: A) Measuring Works On A Section Of 0.72 Km, B) Removing Topsoil To A Depth Of Up To 10 Cm, C) Making Trenches To A Depth Of 35-40 Cm Along With Its Profiling And Compaction, D) Making A Frost-Protective Layer Of A C1.5/2 Mixture With A Thickness Of 30 Cm, E) Making A Sub-Base Of C90/3 Aggregate With A Thickness Of 20 Cm, F) Making An Interlayer Connection With Emulsion Asphalt In The Amount Of 0.5L/M2,G) Execution Of A Leveling Layer Made Of Ba Ac16w With An Average Thickness Of 5Cm,H) Execution Of An Interlayer Connection With Asphalt Emulsion In The Amount Of 0.3L/M2,I) Execution Of A 4Cm-Thick Wearing Course Made Of Ba Ac11s,J) Construction Of Ground Shoulders Reinforced With Aggregate,K) Introduction Of Permanent Traffic Management,L) Execution Of Cleaning And Finishing Works