Bids Are Invited For Hiring A Company To Carry Out A Project For The Execution Of Additional Macro-Drainage Works For Remaining Services In Bairro Bom Viver, In The Municipality Of Biguaçu, Covering The Streets Francisco Venceslau De Faria And Pasqualine Inês Da Costa, In Accordance With The Conditions, Quantities, Requirements And Estimates Established In The Terms Of Reference And Its Annexes.

1. Preliminary Services 1.1 Work Sign Made Of Galvanized Steel Sheet (Sinapi 74209/1Jan/2020)Vgl, 1.2 Location Of The Work, 2.1 Pre-Molded Reinforced Concrete Stave/Closed Gallery, Internal Rectangular Section Of 2.50 X 2.00 M (W X H), Min Thickness = 15 Cm, Tb-45E Concrete Fck = 30 Mpa (Ref Sinapi 104494) Supply And Installation. Af_01/2023, 2.2 Mechanized Trench Backfilling With Hydraulic Excavator (Bucket Capacity: 0.8 M³ / Power: 111 Hp), Width Of 1.5 To 2.5 M, Depth Of 1.5 To 3.0 M, With 1St Category Soil In Locations With High Level Of Interference. Af_04/2016, 2.3 Mechanized Trench Excavation With Prof. Greater Than 1.50 M Up To 3.0 M (Average Between Upstream And Downstream/One Composition Per Section), With Hydraulic Excavator (1.2 M3/155 Hp), Width. From 1.5 M To 2, In Category 1A Solo, In Locations With High Level Of Interference. Af_02/2021, 2.4 Transport With 10 M Dump Truck, On Paved Urban Road, Dmt Up To 30 Km (Unit: M3xkm). Af_07/2020, 2.5 Execution And Compaction Of Base And Or Sub Base For Depedra Rachão Paving - Exclusive Cargo And Transport. Af_11/2019, 2.6 Launching Ballast, 10 Cm Height, First Lift, Unloading Crushed Stone From Trucks, 2.7 Geotextile Blanket Rt-07, 2.8 Removal Of Concrete Pipes With A Diameter Of 1.20 M To 1.50 M Empties And Culverts, 2.9 Demolition Of Interlocked Pavement, Of Manual Way, With Reuse. Af_12/2017, 2.10 Recomposition Of Flooring In Hexagonal Interlocking Floor, With Reuse Of Hexagonal Blocks, For Closing Trenches. Af_12/2020, 2.11 Demolition Of Masonry For Any Type Of Block, In A Mechanized Way, Without Reuse. Af_12/2017, 2.12 Masonry Wall Made Of Concrete Blocks With A Thickness Of 0.20 Mh=1.0M, 2.13 Continuous Shoring Of Trenches With Boards Of 2.5 Wood Used 3 Times - Manufacturing, Erected Installation, 3.1 Crushed Stone Ballast No. 2 15Cm, 3.2 Pumped Machined Concrete Fck 20 Mpa, Including Laying And Densification, 3.4 Structural Concrete Block Masonry 14X19x39 Cm, (Thickness 14Cm), Fbk = 4.5 Mpa, 3.5 Cutting And Bending Of Ca-50 Steel, Diameter Of 6.3 Mm, Used In Slab.Af_12/2015, 3.6 Supply And Installation Of 600 Mm Cast Iron Cap 12.5T, 3.7 Marine Type Ladder In Galvanized Steel Tube 1 1/2 5 Steps, 3.3 Pumped Machined Concrete Fck=30Mpa, Including Placing And Densification (Composition Sinapi_Nov/2015 74138/4U)