Square Steel Profile Pipe, 10*10. Purpose: For Support Posts Of Metal Canopy Structures. Wall Thickness: Not Less Than 3 Mm. Compliance With The Requirements Of Current Gosts. The Product Must Be New And Not Previously Used., Channel 12P Hot-Rolled Steel, Channel Height 120 Mm. Shelf Width Is Not Less Than 50Mm, Thickness Is Not Less Than 4.8Mm, Shelf Thickness Is 7.8Mm. Length 12M, Profile Steel Pipe 6 M, Rectangular Section 100×50 Mm, With A Wall Thickness Of 3 Mm, Made Of Carbon Structural Steel (Type St3 Or Equivalent). Manufacturer: Hot-Rolled/Cold-Formed, Electric Welded. Complies With Gost 8645-68 (Or Equivalent). Purpose: It Is Used For The Manufacture Of Metal Structures, Load-Bearing And Auxiliary Elements Of Frames, Canopies, Hangars, Fences And Other Building Structures., Profile Pipe 6M Rectangular 20×40*2 Mm. Profile Steel Pipe Of Rectangular Section 20×40 Mm With A Wall Thickness Of At Least 2 Mm, Made Of Carbon Structural Steel. Profile Type: Rectangular Closed. Purpose: Used For The Manufacture Of Lightweight Metal Structures, Lathing, Frames, Fences, Partitions, Auxiliary Elements Of Canopies And Building Structures, Cement In Polyethylene Packaging Of 50 Kg, Grade No Less Than M450. For Construction Work For Pouring Foundations, Walls, Floors And Other Building Elements. High Degree Of Strength., Galvanized Profiled Roofing Sheet Made Of Cold-Rolled Steel. Metal Thickness Is At Least 0.45 Microns. Coating: Corrosion And Weather Resistant. Designed For Installation Of Canopies And Roofing. Sheet Length 6M. Compliance With Gost 24045-2016., Metal Roofing Ridge, 200*200. Material: Steel, Matte, Thickness Not Less Than 0.40 Microns,, Fastening Screw, Roofing, For Corrugated Sheets. Type: Self-Tapping, Hex Head. Color: Galvanized. Size 4.8*35Mm., Sand And Gravel Mixture (Sgm). Scope Of Application: For Construction Work, Pouring The Foundation, Screed, For Racks. Quantity: 10-12M3,, Welding Electrode 3Mm, 2.5Kg For Welding. Intended For Manual Arc Welding Of Structures Made Of Carbon Steel Grades In Accordance With Dstu 2651/Gost 380-2005 (St 0, St 1, St 2, St 3). Deposition Coefficient – 8.0-9.0 G/Ah. Electrode Consumption Per 1 Kg Of Deposited Metal Is 1.7 Kg. Designed For Welding Fillet, Butt, And Overlap Joints Of Metal With A Thickness Of 3 To 20 Mm
