Tenders Are Invited For Construction Of Forest Road No. 174 In The Podborsko Forestry And Hardening Of The Vehicle Parking Area In The Stanomino Forestry

1) Construction Works Related To The Construction Of Forest Road No. 174 Include In Particular: - Carrying Out Measurement Works On Linear Earthworks Over A Length Of 0.718 Km, - Mechanical Grubbing Up Of Tree Trunks (Diameters: From 10-15 Cm 60 Pcs, From 16-25 Cm 60 Pcs, From 26-35 Cm 60 Pcs, From 36-45 Cm Pcs. 50, From 46-55 Cm Pcs. 50, From 56-65 Cm Pcs. 40, From 66-75 Cm Pcs. 40) With Cleaning Of The Area After Clearing, - Clearing The Area After Clearing Of Small Branches, Roots And Bark With Removal Of The Area 2,590.00 M2, Mechanical Clearing Of Groves And Cleaning Of The Area In The Area 0.259 Ha,‒ Molding And Compaction Of The Road Body - Embankments With The Purchase Of Material For Soil Replacement In The Amount Of 2,419.02 M3 And Excavations Together With The Removal Of Topsoil And Removal Of Peat From The Subsoil In The Amount Of 2,583.3 M3 In The Native Soil Of The Road Under Construction,‒ Profiling And Mechanical Compaction Of The Subgrade For Construction Layers In The Area 5,660.40 M2, ‒ Construction Of A Foundation Layer Of Construction Aggregate - Crushed Rubble, Thickness. 13 Cm, Fractions 0-63 Mm On The Area. 4,926.79 M2, ‒ Construction Of A Cutting Layer Made Of Aggregate Mixture (Sand Layer) For The Road Made Of Slabs With A Thickness Of 5 Cm On The Area 2,467.60 M2, - Laying The Surface Of Prefabricated Multi-Hole Reinforced Concrete Slabs With Dimensions 0.75X1.0X0.125 M On Sand Ballast - 1,594.05 M2, - Making The Surface Of Crushed Aggregate Fraction 0-31.5 Mm Of The Inner Strip Between The Slabs And On The Outer Sides Of The Slabs At The Roadside And Loops, Exits And Passing Rounds About Gr. Layers 12.5 Cm, On The Area 3,081.16 M2, - Making Ditches And Planting The Area 1 M Behind The Roadside In The Amount Of 1,458.84 M2, - Making Roadsides From Local Material And Transported To The Area. 1,094.13 M2,‒ Construction Of A Temporary Earth Ditch (Bypass) With A Length Of 45M For The Duration Of The Culvert Construction,‒ Construction Of A New Culvert At Km 0+162 Of The Road From A Corrugated Polypropylene Pipe With A Length Of 10 M And A Diameter Of 100 Cm On An Aggregate Foundation Made Of An Unbound Aggregate Mixture With A Fraction Of 0-63 Mm And A Thickness Of 30 Cm, At The Inlet And Outlet Construction Of A Prefabricated Reinforced Concrete End Wall, Strengthening The Bottom Of The Ditch (At The Inlet And Outlet Of The Culvert) With Stone Riprap Over A Length Of 2 M, Strengthening The Slope At The Inlet And Outlet Of The Culvert With Openwork Multi-Hole Slabs And Reconstructing The Slopes, Installing A Wooden Barrier Along The Road On Both Sides Of The Culvert. The Detailed Scope Of Works Related To The Construction Of The Culvert Is Included In The Bill Of Quantities, I.E. From No. 22 To No. 34, Constituting Annex No. 3 To The Swz And In The Documentation Constituting Annex No. 2 To The Swz.2) Construction Works In The Field Of Hardening The Area Of Vehicle Parking Areas Include In Particular: - Construction Of 10 P