Tire Repair Services, Including Fitting And Balancing – Dbr - Refurbishment Of Various Tires. The Tenderer Establishes A Dbr For 48 Months In Order To Refurbish The Tires Required For The M3 Category Cars And Trolleybuses It Operates With Cold Running. Planned Quantity For The Entire Period (48 Months): Based On The Specific Needs Of The Client During Operation, A Total Of 2,300 Units Are Planned. Tire Sizes Currently Used By The Applicant: 12 R22.5 215/75 R17.5 M+S, 225/75 R17.5 M+S, 295/80 R22.5, 275/70 R22.5, 205/75 R17.5. In Addition To The Above Sizes, The Tenderer May Also Request The Refurbishing Of Commercial Vehicle Tires Of Other Sizes In The Individual Bidding Stages. During The Renovation, The Original Load And Speed Index Of The Tire Must Not Decrease. The Tenderer Can Only Carry Out The Renovation Using A Cold Process (Cold Running). Refurbished Tires Must Comply With Unece Regulation 109, Therefore They Must Be Marked With The Markings Specified In The Permit For The Use Of The E Or E Approval Mark. The Tenderer Allows The Tires To Be Renewed Twice, But After A Joint Fault Recording, In The Case Of The Determined Appropriate Technical Condition, The Run-In Can Be Repeated One More Time For Tires Used In Urban Traffic, So If Ideal Conditions Exist, The Carcass Can Be Run-In Three Times. Treadmills Can Be Of Premium Or Medium Category, For Which A Manufacturers Declaration Is Required (Budget Category Is Not Accepted). In Order For The Participants Application To Be Valid, He Must Separately Declare That He Accepts The Tenderers General Terms And Conditions (Hereinafter: T&C) By Signing The Public Procurement Document Described In This Procedure. After The Successful Completion Of The Participation Phase Of This Procedure, The Condition For Participation In The Bidding Phase(S) Is To Send The Valid Bidder Applying For Participation A Printed, Original Copy Of The General Terms And Conditions, Signed In A Corporate Manner, Or The Participation Guide (Hereinafter: Guide) 12.8. Forward The Electronically Signed General Terms And Conditions To The Bidder Electronically. After The Successful Completion Of The Participation Phase Of This Procedure, When A Specific Procurement Demand Arises, The Tenderer Will Send The Invitation To Tender To The Eligible Applicants Through The Ekr. During The Systems 48-Month Validity, Any Economic Operator Can Join The System - If They Submit Their Application For Participation Through The Ekr And Are Deemed Suitable. In The Application, The Participant Must State, Among Other Things, That: • He/She Acknowledges And Accepts The Terms And Conditions Contained In The General Terms And Conditions Published With The Public Procurement Documents, And If The Application Is Valid, The General Terms And Conditions Shall Be Signed And Sent To The Bidder; • Consents To The Fact That, In The Bidding Phase, The Deadline For Bidding Is 5 Working Days, With The Extension Of The Deadline In Justified Cases
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
